Is cycliq waterproof?

Water and dust resistant for all‑weather use.

Where are cycliq from?

Perth, Western Australia
As cycling popularity continues to increase all over the world, so do the combined dangers of congested roads, poor cycling facilities and bad behaviour towards vulnerable road users. After one close encounter too many on the roads of Perth, Western Australia, founder Kingsley Fiegert decided that enough was enough.

How do I check my footage on Cycliq?

Click the menu button > Video Editor > Gallery > Open File Folder.

How do I record on Fly6?

To turn the Fly6 CE on and start recording, press and hold the power button for at least 2 seconds.

How do I reset my fly 6?

Note: The Fly6 Generation 3 must be powered off to perform this action.

1. Ensure the Fly6 Generation 3 is turned off.
2. Hold down the Q button for 30 seconds.
3. The LED will flash white.
4. Release the Q button.
5. The LED may flash blue.
6. Wait 30 seconds.
7. Tap the Power button once to complete this action.
8. Wait 30 seconds.

How do I sync my fly 6 to my Garmin?

Open your Garmin EDGE and once it loads up, swipe down from the topmost part of the EDGE screen to access the quick menu.

1. Click on the “Sensors” button to open up the Sensors settings.
2. Click on “Add Sensor”.
3. Scroll down the list and look for the “Light” button.

How do you reset fly 12?

Open your Fly12 CE USB/SD card cover. With the use of a fine object (eg paper clip or eject pin for smartphone SIM tray), press the reset button as illustrated below. You will know that this is done correctly as you will feel the reset button being depressed.

How do you connect Cycliq?

Plug your Fly6 CE or Fly12 CE’s microSD card into a microSD adapter, then insert into the Apple Lightning to SD Card Camera Reader. You’ll be able to view your video files through the ‘Photos’ app. You can also open CycliqPlus mobile app to edit your videos.

How do you turn on Cycliq light?

Toggle these using the power […] Turning on your Fly12 CEPress and hold the power button for approximately 1 second until power on chime is heard, then release.

How do I reset my Cycliq?

To perform a master reset press the reset button as illustrated:

1. Turn your device off.
2. Press and hold the Q button for at least 30 seconds.
3. Release the Q button.

How do I turn on Cycliq Fly12?

Turning on your Fly12 CEPress and hold the power button for approximately 1 second until power on chime is heard, then release. Power level ‘beeps’ will […] Turning off your Fly12 CEPress and hold the power button until the power off chime is heard. Power level ‘beeps’ will sound, signalling the battery status […]

How do I record on Fly12?

To turn the Fly12 CE on and start recording, press and hold the power button for at least 2 seconds….These include:

1. Logo and timestamp (on/off)
2. Electronic Image Stabilisation.
3. Video resolution.
4. Segment length.
5. Light modes available.
6. Volume of beeps.
7. Beep intervals.

How do I reset my Cycliq fly 6?

How to reset the Fly6 Generation 3 with deep sleep mode

1. Ensure the Fly6 Generation 3 is turned off.
2. Hold down the Q button for 30 seconds.
3. The LED will flash white.
4. Release the Q button.
5. The LED may flash blue.
6. Wait 30 seconds.
7. Tap the Power button once to complete this action.
8. Wait 30 seconds.

How do I reset my Cycliq fly 12?

How do I update Fly12 CE firmware?

Our popular firmware auto-updater app is now ready for use with your Fly12 CE. The app will take care of your firmware updates just by connecting your Fly and letting the app do the rest. Simply download the Mac or PC version of the app from the link below, open it up from your desktop and follow the instructions.