Are all GM 246 transfer cases the same?

The NP246 model transfercase fits a variety of GMC and Chevrolet 4WD vehicles. There are several variations of the 246, so your assembly number or VIN will be required (see below) when ordering this unit.

How much fluid does a 246 gm transfer case hold?

Transfer Case and Differential Fluid Change

Manual transfer case fluid type
New Venture 246-NP8
1999 through 2001	2.4 quarts
2002 and later	2.0 quarts
New Venture 236-NP8	2.0 quarts

How many splines are in a NP246 transfer case?

32 spline
NP246 Transfer Case- NP8 Fits 03-07 with 4L80E (32 spline)- Bulldog Tough OEM Quality Replacement Unit From The Gear Shop.

Do transfer cases have pumps?

GM transfer cases use a gear-driven pump inside the case that is driven off the mainshaft. Because of this design, the pump must “float” in the rear case half. There are four tabs around the edge of the pump that are used to locate it in the housing.

How many sensors are on a NP246 transfer case?

three speed sensors
It is located along the tailshaft at around the 11 o’clock position. NOTE: NP246 transfer cases use three speed sensors for automatic four wheel drive engagement so if you are servicing all three speed sensors you will need three O-ring seals. Click here to view the Merchant Automotive Transfer Case Pump Upgrade kit.

How much does a NP246 transfer case weigh?

Technical Details

Manufacturer	‎Transparts Warehouse
Brand	‎Transparts Warehouse
Item Weight	‎3 pounds
Manufacturer Part Number	‎16686

Is the NP241 transfer case good?

The NP241 is a solid, reliable transfer case and superior to the NP203 it replaced. But as they age, the drivechain can stretch. Also, the synthetic pads on the shift forks wear, causing intermittent problems when the forks do not stay in their intended position.

How often should you change transfer case fluid?

every 30,000 miles
Manufacturers tend to recommend different maintenance intervals based on the type of vehicle and intended use, but generally speaking, it’s safe to perform a transfer case fluid service every 30,000 miles. Vehicles that are used for towing or frequent off-roading should probably get this fluid changed more frequently.

What transfer case is NP8?

Compare with similar items

	This item NP246 Transfer Case- NP8 Fits 03-07 with 4L60E (27 spline)- Bulldog Tough OEM Quality Replacement Unit From The Gear Shop
	Add to Cart
Customer Rating	4.6 out of 5 stars (64)
Price	$69500
Sold By	The Gear Shop Inc

What transfer case has 4L80E?

NP246 Transfer Case- NP8 Fits 98-02 with 4L80E (32 spline)- Bulldog Tough OEM Quality Replacement Unit From The Gear Shop.

Can you upgrade a transfer case?

Almost anything you can think of to improve or upgrade your T-case is available today, and if it isn’t, you can just swap in an Atlas II T-case in one of the three low-range ratios available. Your options are endless when it comes to T-case upgrades.

What does a pump rub kit do?

Pump rub occurs when the four positioning tabs holding the pump in place wear over time. This causes the oil pump to come into contact with the housing itself. The result is a hole worn in the cover, causing fluid to leak and the probability of damaging the transfer case. This simple kit eliminates this problem.

What does a transfer case speed sensor do?

The speed sensor measures the rotation of a toothed wheel on a shaft inside the transmission to determine how fast your car is going.

How much does a 263xhd transfer case weight?

Weight: 95.0 lbs.

What did the NP149 come in?

What did the NP149 come in? The NP149 transfer case was used in General Motors’ full-size pickup trucks and full-size SUVs from 2000 to 2005. The NP149 and later NV149 were used mainly for Chevrolet and GMC full-size pickups, as well as Cadillac’s line of full-size SUVs.

What is the difference between a NP241 and NP243?

The NP241 and NP243 are the exact same case other than the way they are shifted with the 243 obviously having the extra electrical parts.

What did np241c come in?

The NP241 transfer case was in service from 1989-1999. It features an aluminum casing and is driven by a chain. It is a popular model, being found in numerous applications including the Chevrolet Blazer, Suburban, and Tahoe, as well as the 1500, 2500, 3500, and Van.

Can I use gear oil in my transfer case?

Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.

What kind of transfer case does a Ford 246 have?

This transfer case is one of the so-called “automatic transfer cases,” or “active transfer cases.” This description results from the fact that the 246 has an “automatic 4WD function,” a 2WD position, a 4WD High function, neutral and 4WD Low position.

Is there a np246 transfer case for sale?

Currently the NP246 transfer case for sale at an all-time low price. We meticulously designed each unit with upgraded parts to help withstand the massive amounts of torque that can be produced by GM and Chevy trucks. It’s no surprise that our NP246 has become our top selling transfer case on the market.

How does the NV 246 motor work?

Operation of the motor on the NV 246 requires the release of the motor brake, which is always receiving power through the transfer-case fuse. The module controls the motor brake by grounding the brake through a circuit driver that limits the current.

What kind of transfer case does a GM new venture have?

This month’s candidate is the New Venture 246 transfer case, which is found in GM full-size four-wheel-drive vehicles, from 1998 to present. This transfer case is one of the so-called “automatic transfer cases,” or “active transfer cases.”