How much does it cost to Recork a saxophone?
How much does it cost to Recork a saxophone?
*For horns over 30 years old add $70.00. Repad price does not include charges for dent removal, solder work, frozen rods, etc….Saxophone Repair.
| SAXOPHONES | Average for Playing Condition | *Repad |
|---|---|---|
| E Flat Alto | $80.00 | $490.00 |
| B Flat Tenor/ C Melody | $90.00 | $500.00 |
| E Flat Baritone** | $125.00 | $630.00 |
How much does it cost to replace a cork on an alto sax?
You can expect to pay about $20 USD to get a repair shop to replace the neck cork for you, or you can buy a sheet of cork (for around $8-10 USD) and do it yourself. One sheet of cork will be enough material to replace the cork five or six times.
How much does it cost to repair a tenor saxophone?
Saxophone Repair Services
| Service Plans | description | Tenor cost |
|---|---|---|
| Play Condition 1 | Playing Condition Repairs & Adjustments Up to 2 Pads Replaced | $100.00 |
| Play Condition 2 | Playing Condition Repairs & Adjustments Up to 5 Pads Replaced | $150.00 |
| Play Condition 3 | Playing Condition Repairs & Adjustments Up to 10 Pads Replaced | $300.00 |
How do you Recork a saxophone?
- Step 1: Get Rid of the Old Cork and Clean the Area Thoroughly. Using your screwdriver, locate and remove the rod screw that holds the octave mechanism.
- Step 2: Apply the Glue, Let It Dry, and Then the Apply the Cork.
- Step 3: Finishing the Job, and Setting Intonation for Your Mouthpiece.
Can I Repad my own sax?
Re: Is repading a sax really as hard as your local tech would like you to think. Replacing one or two pads is one thing, but completely repadding an instrument is another. If we’re only talking about one or 2 pads, then chances are you should be able to repair them yourself without too much trouble.
How much does a sax cleaning cost?
The cost to get it cleaned and repaired, and have new pads and corks put on, is around $350-400. There are additional cost for extra accessories and luxuries.
How do you put a cork in a saxophone?
Installing MusicMedic Saxophone Neck Cork
- By Curt Altarac. Back to articles.
- Prepare the Cork. Trim new cork so it is the same width as the cork you are replacing.
- Prepare the surface. Remove the existing cork and clean the surface that the old cork was on.
- Apply the adhesive.
- Wrapping the New Cork.
Can I use superglue on cork?
And there’s nothing to stop you using both. I often coat both surfaces with contact adhesive and, when dry, pop a tiny smear of superglue on the cork before fitting it to the key. Best of both worlds.
How long does it take to Repad a saxophone?
Average overhaul is the repad plus a mechanical restoration of the keywork, and that takes me 30-40 hours. Any major dents or soldering or fabrication is extra.
How difficult is it to Repad a saxophone?
How long do saxophone pads last?
Saxophone pads need to be replaced when they become so worn that they leak. With proper saxophone care, this can be less than once every ten years. The life of saxophone pads can be extended by thoroughly swabbing out your instrument each time you practice and properly cleaning sticky pads.
