How do you tell what size my snowmobile track is?
How do you tell what size my snowmobile track is?
To measure your snowmobile track, you need to know the drive pitch and number of lugs. You then multiply these two numbers together to get the length. The quick formula is Pitch x Number of Lugs = Length.
Will a skidoo track fit an Arctic Cat?
Registered. The sno pro’s and flatland late mode Arctic Cat’s use the same 2.86 pitch track that Ski-Doo does.
Are Polaris and Arctic Cat Tracks interchangeable?
Snowmobile tracks are generally interchangeable if you are replacing with the same dimensions and pitch of the tracks. However, be careful to check the front heat exchange clearance between the lugs and/or studs. There needs to be enough clearance there for you to use the new tracks.
What is the pitch on a snowmobile track?
Historically, tracks have been made in 2.00″, 2.52″, and 3.29″ pitch. (Pitch is defined as distance from the center of one lug to the center of the next lug going around the track.)
How do you measure the size of a track?
Three Steps to Measure Your Rubber Track Size
- Measure the Width of the track in millimeters.
- Measure the Pitch in millimeters. This is the distance between the centers of two links.
- Links are also known as drive lugs or teeth.
- Count the total number of links in the track.
What do the numbers mean on rubber tracks?
The first number represents the track WIDTH in millimeters. The second number represents the PITCH, the distance between each link “center to center”. And the last number states the total number of LINKS in that track. You may also see a letter, such as a “A” or “B” if it’s a Excavator track.
Are snowmobile tracks directional?
Most tracks will have a directional arrow molded into the rubber in the center that indicates the direction of rotation. If you flip the sled up to look at the bottom of the track, this arrow should be pointing to the rear of the sled (direction of travel).
What should I look for in a snowmobile track?
Inspecting Your Snowmobile Track For Wear
- Worn or broken lugs – Worn and broken lugs will hinder acceleration and braking.
- Dry rotting – The track will have tiny cracks in the material.
- Worn or broken track clips – Broken guide clips will accelerate wear on the hyfaxes and cause a lack of performance.
How long of a snowmobile track do I need?
A longer track length is usually at least 136 inches (3.45 meters) long. They have deeper lugs for better traction and cover a larger footprint on the snow. They can navigate efficiently off-trail and in deep snow.
What is the advantage of a longer track on a snowmobile?
A longer track length is usually at least 136 inches (3.45 meters) long. They have deeper lugs for better traction and cover a larger footprint on the snow. They can navigate efficiently off-trail and in deep snow. They are usually reserved for snowmobiles with more powerful motors.
What is the diameter of a track?
Solution. The two straightaway sections of the track are each 84.39 meters. The two semi-circular sections can be joined to form a circle whose radius is 36.5 meters and so the diameter of this circle is 2 \times 36.5 = 73 meters.
What is the total length of the track?
400m standard track The Track comprises 2 semicircles, each with a radius of 36.50m, which are joined by two straights, each 84.39m in length. The Track has 8, 6 or occasionally 4 lanes but the last is not used for international running competition. All lanes have a width of 1.22m ± 0.01m.
How do you find the track size?
What is the best snowmobile track length?
How are track lug sizes measured?
Step 1: Count the number of lugs on the track. Step 2: Measure the pitch using a measuring tape (from centre of one lug to the centre of next one). To make it more precise, measure the distance between 11 lugs and divide that with 10. For example, if the distance between 11 lugs is 30 inches the pitch is 3 inches.
What size track is best for trail riding?
First, trail riders: If you plan on strictly riding on trails, the range you should be considering is between 1.25 inch lug depth and a 1.6. If your sled is generating anything more than 125 horsepower, you would seriously benefit from upgrading to a 1.35, 1.5 or a 1.6-lugger.
What is the best track length for a snowmobile?
Long Track A longer track length is usually at least 136 inches (3.45 meters) long. They have deeper lugs for better traction and cover a larger footprint on the snow. They can navigate efficiently off-trail and in deep snow. They are usually reserved for snowmobiles with more powerful motors.
What are the models of Arctic Cat skis?
Arctic Cat Ski. Models: Bearcat, Cheetah, Cougar, El Tigre, EXT, Lynx, Jag, Mtn Cat, Pantera, Panther, Prowler, Thunder Cat, Wildcat
How do I find the year of my Arctic Cat snowmobile?
The guide lists Arctic Cat snowmobile models in alphabetical order. So your first option is to search by simply scrolling down looking at the left hand column for your model of sled and then checking the year column for the correct year.
What size covers fit Arctic Cat snowmobiles?
Fits 93-04 high power Arctic Cat Snowmobiles. 2X-Large Universal Covers. Fits snowmobiles 116″ to 130″ long (tail to nose). Arctic Cat Ski Skins 3/16″ Black. (Pair) Arctic Cat Slide (sold each). Fits many late model Arctic Cat Snowmobiles with extended 136″ tracks. 53-3/4″ long. Arctic Cat Slide Graphite (sold each).
What size hardbars do I need for my Arctic Cat?
Arctic Cat Hardbars. Fits many 92-99 low-mid power Arctic Cat models with Steel Skis. 24-1/4″, 3 studs. (Sold as pair.) 4″ Carbide Runners. Fits many 92-99 low-mid power Arctic Cat models with Steel Skis. 24-1/4″, 3 studs. (Sold as pair.) 6″ Carbide Runners. Fits many 92-99 low-mid power Arctic Cat models with Steel Skis. 24-1/4″, 3 studs.
