How do you program a Toro sprinkler timer?
How do you program a Toro sprinkler timer?
Position the control knob to “Program Start Time” with the “Program” button in the same position as above to set the watering start time. The number “1” will begin flashing to allow you to set the time for the first occurrence of watering. Use the “+/ON” and “-/OFF” buttons to select the time for watering to begin.
How do I reset my sprinkler controller?
SRC
- Unplug the controller’s transformer.
- Press and hold down the, and buttons.
- Plug the controller’s transformer back in.
- Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.
Why does my sprinkler stay on?
One of the most common reasons for a valve to keep running continuously is the accumulation of debris in the diaphragm, which prevents the valve from closing. This video will teach you how to clean the diaphragm on your valve. The most common reason for a valve to remain on, or weep, is debris.
Why does my Toro sprinkler system run twice?
The answer is usually there are too many programmed start times — program start times are being confused with zone (station) run times. Some controllers have up to eight start times per day to a single program (e.g. A).
Why won’t my sprinklers turn on manually?
Here are some common reasons why your sprinkler system won’t turn on: Lawn sprinkler control timer isn’t working correctly. Clogged or dirty sprinkler heads. Broken sprinkler heads.
Why doesn’t my sprinkler shut off?
If your irrigation system does not turn off, you need to isolate the problem. This starts by checking the main water line and the controller. If those are working, then you need to locate the valves and check to see whether they are dirty, the diaphragm is torn, or the solenoid is broken.
Why do my sprinklers continue to cycle over and over?
The Reason why a Controller Repeats a Cycle Over and Over The answer is usually there are too many programmed start times — program start times are being confused with zone (station) run times. Some controllers have up to eight start times per day to a single program (e.g. A).
