What does the yellow trouble light on my DSC keypad mean?
What does the yellow trouble light on my DSC keypad mean?
This indicates that the alarm panel is not able to detect the phone line connection. Please ensure that your telephone system is up and operational. If it is not, contact your telephone carrier to resolve.
How do I stop my DSC alarm from beeping Low battery?
If it displays “low battery” and you have recently experienced a power outage, simply wait 24-hours after the power comes back on for the battery to recharge. If the beeping keeps on beeping and beeping, however, you’ll probably have to replace the battery.
How do I reset my DSC keypad?
To reset the detectors, press and hold the Reset key for two seconds or press *72.
How do you clear orange light on DSC alarm?
Instructions To Clear The Trouble Light On Your DSC Alarm: Press # to silence the keypad beeping. Press * followed by 2 on your keypad.
What does yellow triangle mean on alarm?
a trouble condition
The yellow triangle means that your alarm system is experiencing a trouble condition. This could be caused by a number of different possible factors, such as a low battery, an activated tamper or communication problems. Only certain alarm systems use a yellow triangle to indicate a trouble.
Why is my alarm keypad beeping?
Most systems will begin beeping or chirping as a result of a total power outage or failure to recharge the system backup battery. For many of our most popular systems, beeping alarms and low battery trouble beeps can be silenced by pressing the [OFF] or [#] buttons from the keypad.
What does the orange triangle mean on my alarm system?
The Alarm System Has a Low Battery The issue may be as simple as a change of battery. If a specific zone is running low on battery, you’ll be able to see the error when you hit *2. All you have to do is change the batteries and then disarm and arm your system.
What does the triangle symbol mean on the DSC alarm?
Let’s get straight to it! A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems. To find out what the problem is, you can simply press *2 on your keypad.
What is my master code?
The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system. You can arm and disarm the system and any partition on the system if you are using multiple partitions.
What if I forget my alarm code?
So, you should keep your home security code up to date and call your security company if you forget it.
Why is my security alarm beeping every 30 seconds?
Low Battery – The alarm will chirp every 30-40 seconds (every 60 seconds for some alarms) for a minimum of seven days. Replace the battery when this occurs, then test your alarm.
What is the default master code for DSC alarm?
1234
The default master code is 1234. The master code is automatically assigned to user number 40. The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system.
How do I reset the yellow triangle on my DSC alarm?
Press the ‘#’ key to silence the beeping, however you will need to fix the problem before the light will go out. You can also press ‘9’ after ‘*2’ to acknowledge and cancel the trouble condition but you still must fix the problem.
