Will a 8.8 rear end fit a 1965 Mustang?
Will a 8.8 rear end fit a 1965 Mustang?
Registered. The 1985-93 8.8″ is the same width as a 1967-70 axle, so it’s 2″ too wide to “properly” fit a 65-66, though deep backspace on the wheels could compensate for that.
What rear end will fit a 1966 Mustang?
Famous Member. 65-66 Mustangs come with the 7.25″ rear end, non-removable carrier.
How wide is the rear end in a 65 Mustang?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
| ’71-’73 Mustang | 61 11/44 |
| ’67-’71 Comet, Cougar | 59 11/44 |
What rear end is in a 67 Mustang?
1967 Ford Mustang Axle Information & Ratios
| Axle code | Ratio & type |
|---|---|
| F | 2.80 locking differential |
| 2 | 2.83 open differential |
| B | 2.83 locking differential |
| 1 | 3.00 open differential |
How wide is a Ford 8.8 rear end?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
Is Ford 8.8 limited slip?
Ford 8.8″ 10 Bolt, 28 spline, 1979-Current. Limited-Slip-to-Locked, Select-able Locking Differential. Limited-Slip-to-Locked, Select-able Locking Differential.
What’s the best rear end for drag racing?
Ford 9″- The Ford 9″ is definitely the most popular of the rear ends in drag racing. It offers good strength characteristics and the largest variety of gear choices. The thirdmember type center section allows a racer to have multiple gear ratios available and is much easier to change than a rear loading type rear end.
What vehicles did the Ford 8.8 come in?
Common Applications
- 1986-2014 Ford Mustang.
- 1982-2012 Ford F-150.
- 1982-1996 Ford Bronco.
- 2001-2005 Ford Explorer Sport Trac.
- 1991-2011 Ford Ranger 4.0L models.
- 1991-2001 Ford Explorer (Solid axle)
- 1985-2011 Ford Panther platform vehicles.
- 2012–Present Ford F-150 (Super 8.8, depending on engine and other options)
What Mustangs have the 7.5 rear end?
All ’79-85 Mustangs featured the 7.5 rear ends.
Why is Ford 9-inch rear end so popular?
The Ford 9-inch is desirable because it has a removable carrier, which allows quick rear end changes. Many racers carry an extra carrier assembly with a different rear end ratio so they can try different combinations on the same day while at the track.
What is the difference between 8.8 and 7.5 rear end?
The top and bottom of the 7.5-inch gasket are straight with rounded sides. The 8.8-inch gasket has flat sides, top and bottom, with rounded corners.
