What size are stock F30 wheels?
What size are stock F30 wheels?
Standard factory wheels offsets: 18″ Double Spoke Style 400M (M Sport wheels) – 18×8″ ET34 225/45-18 front / 18×8. 5″ ET47 255/40-18 rear.
What bolt pattern is BMW F30?
5×120
F30’s, like many BMW’s have a bolt pattern of 5×120 and a center bore of 72.56 mm.
What size are my BMW wheels?
Bmw wheel fitting chart
| front/front&rear | rear only | |
|---|---|---|
| 18×8.5 | 40 | 225/40R18 |
| 18×8.5 | 40 | 255/35R18 |
| 19×8 | 40 | 225/35R19 |
| 19×8 | 40 | 235/35R19 |
What offset for BMW f30?
BMW – 3 Serie F30 (2012 – 2019)
| PCD: | 5×120 |
|---|---|
| Center bore: | 72.5 |
| Offset: | 34 |
| Mounting: | Bolt – 14 x 1,25 |
| Wheel torque steel: | 120 Nm / 89 ft-lb |
What is BMW wheel offset?
A high offset means there is a large gap between the wheel mounting surface and the centerline. The wheel will tuck under the bodywork more. A lower offset will push more of the wheel to the outside of the car. In general, 1 and 3-series cars have a high offset and 5, 6, and 7-series cars have a low offset.
What size rims are on a 2013 BMW 328i?
17″ diameter, 7.5-8″ width2013 BMW 328i / Wheel size
Will BMW f30 wheels fit f10?
They will fit just fine. They will fit just fine. Thanks for the info.
Can you run staggered on xDrive?
Yes. Just make sure the rolling diameters are the same (or very close). Yup, BMW claims the front and rear tire diameters should only differ by ~1% at the most to avoid damage to the xDrive system. The tires should also differ by 3% diameter compared to the original wheels at the most.
When did BMW go to 5×112?
It’s also known as the PCD (Pitch Circle Diameter). Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle. This is also the spec used by Audi, VW, and Mercedes.
What is BMW wheel bolt pattern?
Nearly all BMWs have 5 lug bolts in a 120mm bolt circle. Beginning with the G01 7-series chassis in 2009, all G-chassis use a 5×112 bolt pattern – the same number of lug bolts but in a 8mm tighter circle. This is also the spec used by Audi, VW, and Mercedes.
What size tires are on a 2013 BMW 328i?
P225/45R17 (Coupe · Convertible)
P225/50R17 (Sedan)
2013 BMW 328i/Tire size
What size wheels do you use for F30?
Our F30 race cars run a 9.0″ wheel, which clears the front and rear without issues. An 8.5″ square set is also good if you don’t want/need the extra weight of a 9.0 and wider tire.
What is the stock wheel size for a BMW 335i?
Hi,Dell,For BMW 335I,the stock wheel size is 8.5Jx17 ET36 for front and 9Jx17 ET36 for rear.bolt pattern is 5×120.Tire size is 225/45R17 for front and 245/40R17 for rear. reply. I have a 2001 325 i wagon and want I have a 2001 325 i wagon and want to put a later model 2006 and up stock rim on it 16 in.
What size tires for the E30?
And the M20 and M42 engines simply don’t need much more than an 8.0″ 225 tire anyway. The E30 was also the last model to use a 4-lug hub although 5-lug swaps are common.
How many wheel designs does BMW have?
BMW gives great importance when it comes to wheel design and which is why they have a vast portfolio of over 200+ wheel designs, the majority sharing the same PCD pattern with a few exceptions. You have came to the right place if you are either researching the specs of your current wheels, or looking to see what else is available for your car.
