What is the difference between NV3500 and NV4500 transmission?

Nv3500 can handle any SB and highway and moderate towing. NV4500 is a great trans, but as stated, it is a tow truck box 3500 is slick by comparison. Drive each one and see what feels best. A GM 4X4 V8 NV3500 has larger output shaft that is same as NV4500 so T-cases can be interchanged.

Can you replace a NV3500 with a NV4500?

The 3500 has an integrated bell housing, so the 4500 will have to be purchased with its own. Both use the same clutch and flywheel config. U can use the same clutch and master cylinder u have for the new 4500. Both bolt up to the np241 IF the spline count is the same.

How much torque can a NV3500 handle?

The Dodge Dakota NV3500-HD version was rated for 340ft-lb of torque.

How long is a nv3500 transmission?

The specifications for the transmission are as follows: Make: New Venture Gear. Length: 16.7″ Weight: 97 lbs.

What years did Chevy use the NV4500?

The NV4500 was first released in Chevy / GM trucks from 1992 under GM RPO code MT8 and GM part #12346190. It was introduced into Dodge trucks in 1995. Though it has it roots as the New Process 4500 four-speed beginning as early as 1972 in Dodge trucks, its current incarnation as we know it today is quite different.

How much does an NV3500 transmission weigh?

At approximately 110 lbs, the NV3500 is relatively lightweight. A more robust version of the transmission, the NV3500-HD, was used exclusively in the Dodge Dakota midsize pickup from 1994 to 2004 model years; it features a slightly higher input torque rating.

How many splines does a NV3500 have?

Because the NV3500 and the NP231 both have a 23 spline outer shaft, they are interchangeable.

How much does it cost to rebuild a NV3500?

Remanufactured NV3500 Transmission Price

Price	Core	Upfront Cost
$2175	Waived*	$2175

What Dodge trucks came with NV3500?

The current NV3500 is found in full size GM trucks from 1988 and newer, S10 trucks from 1990 and newer, and Dodge Dakota V8 Ram trucks from 1994 and newer….The NV3500 is a five-speed manual transmission.

• Check the shift rail on the transmission.
• Look at the body of the transmission.
• Locate the plugs.

How much HP can a NV4500 handle?

A NV4500 is rated to a GVW of 14,500. The amount of power a tranny can hold is completely dependent on the driving style. I have heard guys blowing tranny’s just over stock, and some reaching over 600hp.

What GM vehicles have a NV4500 transmission?

Engine Compatibility and Adaptability. The NV4500 is found in GMC & Dodge trucks. The bellhousing pattern for 1993-1994 GM versions is unique from the later (1995-) GM and Dodge units. The 1993 and 1994 Chevy versions have a lower first gear of 6.34:1 and an unsynchronized reverse gear.

What trucks came with a NV4500?

General Motors used the NV4500 as RPO MT8 & MW3 in 8500 + GVWR light trucks.

• 1991–2000 GMC & Chevrolet C/K 2500 and 3500.
• 1999 & 2000 Chevrolet Silverado 2500 and 3500.
• 2001–2006 Chevrolet Silverado 2500HD and 3500 and 2007 Silverado Classic.
• 2001–2006 GMC Sierra 2500HD and 3500.

What years did Dodge use NV4500?

What did the NV3550 transmission come in?

The NV3550 was the transmission that superceded the AX15. It comes in Jeeps 2000-2005 with a 4.0L engine. IT is generally considered a significantly better tranny than the quite decent AX15.

How long is a GM NV3500 transmission?

How long is the NV3500 transmission?

How much does a NV3500 weigh?

Weight Information

Curb Weight – Front	3198 lbs
Curb Weight – Rear	2833 lbs
Base Curb Weight	6042 lbs
Gross Combined Wt Rating	15999 lbs
Gross Axle Weight Rating	9910.00 lbs

What year is a NV3500?

The current NV3500 is found in full size GM trucks from 1988 and newer, S10 trucks from 1990 and newer, and Dodge Dakota V8 Ram trucks from 1994 and newer. The NV3500 is a five-speed manual transmission.