What is a trauma pad in a vest?

Trauma Pad Trauma pads are designed to be worn in conjunction with and behind your body armor to reduce the amount of energy transfer to your body, reducing felt energy through your armor and mitigating backface deformation. Trauma pads offer no increase in ballistic protection.

Do body armor trauma pads work?

No. Trauma Pads are designed to reduce blunt force trauma if your armor takes a round. Trauma Pads are intended to be worn behind ballistic body armor panels, providing an extra layer of comfort and adding to the effectiveness of the hard armor plate.

What does adding a trauma pad to armor do?

Trauma pads are designed to absorb impact energy and protect the wearer from back face deformation injuries. This energy transmission is the result of the back face of the armor deforming during impact.

Do trauma pads make a difference?

Trauma Pads Make for Better Bulletproof Clothing While that will keep you alive, projectiles often pack a pretty hard punch as well. Bullets that hit body armor have been known to crack ribs, break collar bones, and cause massive bruising and possibly even internal bleeding without actual penetration.

What are AR500 trauma pads made of?

Soft body armor is made up of aramid fibers and other materials designed to “catch” the bullet, spreading the projectile’s energy over a larger portion of the ballistic material. While a ballistic vest can prevent penetration, it (and therefore the user) still absorb the bullet’s energy.

What is AR500 FragLock coating?

AR500 Armor, now with Fraglock™ Working with scientists and materials experts, we have developed a proprietary new polyurea blend that adheres better and offers improved durability. We call the formula FragLock™ and we’re proud to announce that it is the new standard for all of our steel body armor plates.

Can you use soft armor as trauma pads?

In some cases, yes, soft armor can replace trauma pads. Soft armor, like a trauma pad, can reduce the blunt-force trauma of a bullet impact when used in conjunction with hard armor. The success of this combination will depend on the ballistic rating of the vest and the power of the ammunition.

What are ar500 trauma pads made of?

Are trauma pads necessary on body armor?

Are Trauma Pads Necessary? Typically, old bulletproof vests need an add-on trauma pad. But, newer versions of military-grade ballistic vests and plate carriers, such as SAPI and ESAPI systems, do not as they are rigid enough to withstand the energy of incoming rounds.

How much back face deformation is lethal?

If this “back face” deformation is beyond 44 mm, for example, it is generally deemed unsuitable for armor materials that are worn directly on the body. Such a large amount of deformation could cause serious injury or be lethal, even though the threat may not penetrate the skin [27].

Does Kevlar stop spalling?

Made in the U.S.A. While it does not contain ballistic properties on its own, when used in conjunction with steel body armor plates, it provides an unprecedented level of protection from spall. It is comprised of a special blend of Kevlar that is designed specifically to capture spall or ricochet.

What will AR500 armor stop?

Level III Body Armor is designed to offer protection against the rifle caliber 7.62×51 NATO M80 Ball / . 308 Winchester at velocities up to 2,780 feet per second. Third-party testing has been performed with calibers up to 5.56 XM193, 7.62x54R, 30.06, 6.5 Creedmore, and . 338 Lapua Magnum.

What is Backface signature?

Backface signature is the amount of deformation, or damage, created on the backside of a piece of armor after an impact. The amount of backface signature is defined by the quality of your armor, along with the speed, velocity, weight, and caliber of the projectile.

Do spall guards work?

The use of steel plate spall guards is highly recommended in high tension scenarios. Tactical spall blockers can help you protect yourself against heavy bullet fire. Conventional body armors are not enough to absorb the kinetic energy of a high-speed bullet. However, the armor spall guard can do so easily.

What will level 3+ steel body armor stop?

Level/Type III Body Armor Level III will stop most of all 5.56mm and 7.62mm bullets, but will not defeat military-grade armor-piercing ammo. For example, a NATO M855 5.56 x 45mm bullet with a 62-grain steel core will defeat a Level III armor system.

What is the maximum allowed backface deformation?

NIJ STANDARDS FOR BACKFACE SIGNATURE The National Institute of Justice (NIJ) is the organization that sets the standards for body armor. The limit of deformation allowed by the NIJ is 1.73 inches (44mm) in depth for body armor. All vests are required to be tested against materials that mimic the human body.

Will Kevlar stop spalling?

At Predator Armor, we utilize a unique multi-layer Kevlar lining that mitigates frag/spall, alleviating the concerns that many bring up. Having designed our products in-hand with former/active-duty service members, we have a thorough understanding of the usefulness of Kevlar in personal protection.

Can ceramic plates spall?

𝐂𝐞𝐫𝐚𝐦𝐢𝐜 𝐩𝐥𝐚𝐭𝐞𝐬 𝐝𝐨 𝐍𝐎𝐓 𝐬𝐩𝐚𝐥𝐥.

What are trauma pads for bulletproof vests?

Trauma pads, called trauma plates or ballistic panels, are protective gear that provides additional protection to a person wearing a bulletproof vest. Considered as an add-on item, it is an insert that lessens the ballistic force of any projectile. It lowers the risk for ballistic and blunt force trauma, hence the name trauma pads.

What are the trauma pads?

These specially engineered Trauma Pads absorb impact energy and provide comfort when wearing our body armor panels. This microcellular urethane foam has been long trusted in sports impact protection and an extremely low compression set. The materials are high density and flexible.

Are trauma pads necessary for soft body armor?

The question still lies as to whether trauma pads are necessary or not. Unfortunately, some bulletproof vests and carriers do not have provision for trauma plates. Also, to pass the NIJ standards, soft body armors need to be as it is without add-ons.

What is the minimum back-face deformation for trauma pads?

As per the NIJ (National Institute of Justice), before they can give a passing mark from their thorough testing, the trauma pad should be able to halt the projective from reaching the person. Also, its back-face deformation should be lower than 44 mm or about 1.7 inches deep.