What is a 3 way shower diverter valve?

The three-way diverter allows you to alternate between any of your selected shower outputs by directing the water from the shower head to each additional accessory, one at a time. The diverter will not adjust the water temperature or turn the water off or on.

How does a 3 handle shower diverter work?

Three-Valve Shower Diverter A three-valve shower has three different handles that you turn to open or close the valves. One handle opens the hot water valve, one opens the cold water valve, and the third (generally in the middle of the temperature valves) diverts the water into the spigot or up to the shower head.

How do I know what shower diverter I have?

The larger handle on the assembly will control the temperature while the smaller handle or level will control the direction of the water. Single-valve or T diverter – This is the most common type of diverter. If you have a handle that pulls straight up from the tub faucet, you likely have a T diverter.

What is the difference between a 3 setting and 6 setting diverter?

The answer will determine which Shower Control Diverter you need. Remember, if you want a shower system with 3 peripheral spray outlets you will need a 6-setting diverter. If you want a shower system with 2 peripheral spray outlets you will need a 3-setting diverter.

Can a shower diverter be repaired?

Once you’ve determined that your shower diverter is broken, don’t delay in repairing it. Though it might be an easy task to put off, a broken shower diverter wastes water and creates a poor shower experience. Repairing a shower diverter is a home improvement project that you can complete in just one day.

What is a 4 way shower diverter?

4-Way Thermostatic ValveThis Thermostatic Valve has a four-way diverter that gives you the perfect setup to switch between an overhead shower, hand shower, tub spout, or other enhancements you have installed in your bathroom.

How does a 3 port diverter valve work?

This type of three way motorised valve has port A normally closed with no power to the valve. In this state, water can flow from port AB to port B. When the electrical supply is activated, the actuator motor overcomes the force of the internal spring and closes port B. This allows water to flow from port AB to port A.

How much does it cost to replace a shower diverter?

Replacing a shower diverter valve costs $225 to $575, including materials and labor. A shower diverter valve switches the flow of water between the bathtub spout or shower head and is typically controlled by a small handle located on the center trim plate or near the tub spout.

What is the difference between a diverter valve and a transfer valve?

The main difference between a diverter and a transfer valve is how they direct the water supply. Diverters switch the flow of water between a tub and shower—either the showerhead or the tub faucet gets the water flow. Transfer valve sends water to multiple outlets at the same time.

What is difference between diverter and mixer?

Diverter get concealed inside wall where the spout and the lever (knob) are different parts unlike wall mixer. Since all the functional parts get concealed in wall, there’s only an aluminum sheet with lever, spout and overhead shower visible. The spout of diverter is generally installed 18” from flooring.

Is a 3 port valve the same as a mid position valve?

Both valves are 3 port. But one is simply a diverter. The mid position valve however flows water to both systems simultaneously when CH is turned on. The hot water will usually be satisfied first due to lower flow resistance which then allows the valve to divert fully to the central heating.