What does the crossed out wheelie bin symbol mean?

The crossed-out wheelie bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products and batteries must be disposed of via separate collection at the end of their working lives.

What is the WEEE label?

What is the WEEE label? The symbol indicates that the product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling. The WEEE marking must appear on any electrical and electronic equipment placed on the EU market.

What is WEEE passport?

The WEEE establishes a system to recycle and reuse disposed electrical and electronic equipment in order to reduce landfill waste. It requires manufacturers to design products in view of recycling, and to provide information about hazardous materials.

What are WEEE products?

WEEE includes equipment that has a wind-up or solar mechanism, or that runs on batteries. Solar panels, solar panel systems and batteries are covered by the WEEE Regulations.

What is WEEE and RoHS?

RoHS regulates the hazardous substances used in the manufacture of electrical and electronic equipment (EEE), while WEEE regulates the disposal of this same equipment. All applicable products for the EU market must pass WEEE compliance and carry the “Wheelie Bin” mark.

What are the types of WEEE?

WEEE can be of two types: domestic and professional, which are then subdivided into 10 categories:

• Large household electrical appliances.
• Small household electrical appliances.
• IT and telecommunications equipment.
• Consumer equipment (consumer electronics)
• Lighting equipment.
• Electrical and electronic tools.

What is the difference between EEE and WEEE?

The Waste Electrical and Electronic Equipment (WEEE) directive introduced new responsibilities for businesses selling and/or using Electrical and Electronic Equipment (EEE). The WEEE directive was first published in 2002 and has been updated in 2012.

Is all WEEE hazardous waste?

This is to take into account the fact that a lot of WEEE contains Persistent Organic Pollutants (POPs – don’t degrade in the environment, they instead bioaccumulate with potential adverse impacts on human and environmental health); and the revision in 2019 of the POP Regulations, now means almost all WEEE is classed as …

How do I get a WEEE certificate?

To apply for approval you must have an exemption, permit or licence to operate a WEEE ATF site and you must: receive WEEE from a designated collection facility ( DCF ) or a producer compliance scheme ( PCS ) who collected that WEEE.

What does RoHS apply to?

RoHS applies to all electrical and electronic kitchen appliances including blenders, refrigerators, toasters, and steamers. Any electronic kitchen appliances’ components need to be RoHS compliant before placed in the EU market.

Are LED lights hazardous waste UK?

Most LEDs do not contain harmful substances like CFLs, so they can be disposed of like regular incandescent bulbs. Before you toss your used LEDs, make sure they are safe to throw away with your household rubbish – or better yet, recycle your used LEDs.

Is my product EEE?

Electrical or electronic versions of standard products such as electric toothbrushes and electric suitcases are EEE products. Products that are not connected to a mains supply may still be EEE . They can be wind-up, battery-powered and solar-powered products.

Is electrical cable WEEE waste?

The WEEE Regulations apply to finished products. Components, sub-assemblies, consumables and spares are usually exempt. However, accessories, such as headphones, computer keyboards, antennas and connecting cables, are classed as WEEE if they do not have a function by themselves and are only used with another product.

Do I need a WEEE Licence?

See the detail in the WEEE evidence and national protocols guidance. To apply for approval you must have an exemption, permit or licence to operate a WEEE ATF site and you must: receive WEEE from a designated collection facility ( DCF ) or a producer compliance scheme ( PCS ) who collected that WEEE.

Do I need to be WEEE registered?

All obligated producers that place more than 5 tonnes of EEE on the market must join an approved compliance scheme like Electrolink or Weee Link. If you place less than 5 tonnes on the market then you can either join a compliance scheme or register directly with the appropriate agency.

Is RoHS mandatory in Australia?

All product providers, including original equipment manufacturers (OEMs), original design manufacturers (ODMs), and subcontractors, must comply with RoHS regulations.

Does RoHS mean lead free?

RoHS (Restriction of Hazardous Substances) is a European Union directive that restricts the use of lead, mercury, cadmium, chromium (VI), PBBs, and PBDEs in electrical and electronic equipment as of July 1, 2006.

How do I dispose of LED light bulbs UK?

Are LED lights hazardous waste?

Compact fluorescent bulbs, high intensity discharge bulbs (HID), and light emitting diode (LED) bulbs are hazardous and must NOT go in any trash, recycling, or composting bin.

What is EEE in RoHS?

Here is some information about how to determine if a product is in scope of EU RoHS. The definition of EEE: All equipment that has at least one intended function which is dependent on electric current or electromagnetic fields, or that generates or transfers or measures such currents and fields is EEE.

What do the crossed-out wheeled bin symbols mean?

the symbol of the crossed-out wheeled bin your identification mark, such as brand name or trademark If your product has been placed on the market after 13 August 2005, you can either: add a bar underneath the crossed-our wheeled bin symbol, or specify the date that the product was placed on the market

What are the dimensions of a wheeled bin marking?

(b) Dimensions of the marking – the height of the solid bar equals h and the width equals 1,2 a. The height (h) of the bar shall be the greater of 0.3 a or 1 mm. The bar shall only be used in conjunction with the crossed out wheeled bin.

What is the height of the bar on a wheeled bin?

The height (h) of the bar shall be the greater of 0.3 a or 1 mm. The bar shall only be used in conjunction with the crossed out wheeled bin. The bar shall not contain any test or any kind of additional information. The dimensional relationship shown shall be maintained.