Should you cover your trailer hitch?
Should you cover your trailer hitch?
In between your adventures it is important to keep your hitch protected. So how do you do that? The answer is simple: Get a hitch cover. Although it may seem like an added expense, a hitch cover can extend the life of your hitch and protect it from the elements, which can lead to rust or water damage.
How do you measure a hitch cover?
You measure hitch ball size starting with the diameter of the ball itself. The diameter should be stamped into the top of the ball, or you can use a tape measure or ruler to find the measurement yourself. Use the diameter to match your trailer coupler.
How do you keep a hitch cover on?
A regular hitch pin and clip would work to keep the cover in the hitch. If your trailer hitch is a Class I or II with a 1-1/4 inch wide receiver then you would use pin and clip # PC2. For Class III, IV, and V receivers you would use # PC3. The other option is to go with a lock.
What is the purpose of a hitch cover?
Hitch plugs, also called hitch covers, fit over the hitch opening of your car, truck, or SUV. In addition to shielding the hitch from moisture, dirt, and debris, the hitch cover can express your personality or add accessories such as lights to your vehicle.
Do you need a tow ball cover?
Moderator. Keith, yes, keep your tow ball covered when not towing, to make sure it is not contaminated with oil or grease, even from exhaust fumes, such as are present in diesel exhausts.
Should you grease a trailer ball?
You do not need to grease your trailer hitch ball. That is entirely up to you. However, greasing it is recommended. Greasing will help ensure that the trailer hitch ball keeps its structural integrity, and it will help prevent it from squeaking.
Can you flip a hitch upside down?
So, can you flip your tow hitch? If the tow bar and tow tongue manufacturer approve, along with the vehicle manufacturer, you are good to go. Make sure its not going to hit anything, and that it doesn’t upset your tow ball weight, and you’ll be just fine.
How do you clean a rusty tow ball?
To remove light rust, use a fine emery cloth, in conjunction with a spray of brake cleaner, cleaning should not be necessary as the action of the Alko hitch will clean any light rust as happens with most brakes. Excessive abrasive cleaning should be avoided as it will eventually reduce the size of the ball.
How does naval jelly remove rust?
The recommended procedure is as follows:
- Apply naval jelly liberally to the rusted metal with a brush, working it into crevices and pits carefully.
- Let the product work for 5 to 10 minutes, or up to 15 minutes for heavy rust.
- Rinse the area with water and check for residual rust.
Is White Lithium Grease good for hitch ball?
It should be fine. An EP (extreme pressure) grease would be be best, but any grease is better than nothing.
What is the correct tow ball height?
17″-21″
The hitch ball on your tow vehicle should be 17″-21″ off the ground at the centerline of the ball.
