Is there a new Xfinity remote?

The Voice Remote is available to eligible new and existing X1 and Flex customers. Visit your nearest Xfinity Store to pick one up in person or order one to be shipped to you via UPS in a Getting Started kit (accessory shipping and handling fees will apply) through the Xfinity Assistant or by contacting us.

How do I pair a new remote to my Xfinity box?

Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Once the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.

Does Comcast charge for replacement remotes?

Replacement remotes are free and can be either picked up in store by going to your Local Xfinity Store or one can be shipped out. Bear in mind, though the remote is free, there is a one-time $5.95 shipping charge.

Does Comcast give free remotes?

Comcast provides this remote at no additional charge for our customers and offers help and support for using it, though we do not manufacture the device. The remote control requires installation of four AA batteries (included).

What is the difference between the XR11 and XR15 remote?

Key Differences XR11 is flat on either end. XR15 is angled at either end. XR11’s Microphone button is two rows up from the directional pad in the center of the Voice Remote. XR15’s is directly below the directional arrow pad.

Why did my Xfinity remote stop working?

Press a button on the remote. If the LED does not flash at all, replace the batteries and try again. If the LED flashes red five times on any button press, this is an indication that the batteries are very low and should be replaced. If the buttons are still unresponsive, chat with us for assistance.

Why will my Xfinity remote not work?

How do I pair my Xfinity XR11 remote?

Be sure to point the remote at your equipment during setup.

1. Press and hold SETUP until the LED turns GREEN.
2. Press the Xfinity button.
3. Follow the TV on-screen instructions to enter the 3-digit code that appears.
4. The remote is now paired and voice commands should work when you hold down the VOICE CONTROL key.

How much is an Xfinity controller?

Compare with similar items

	This item XFinity Comcast XR15 Voice Control Remote for X1 Xi6 Xi5 XG2 (Backlight)	Xfinity Comcast XR5 RF Remote Control X1 w/Backlight – Version V4-U
Price	$1229	$9.99$9.99
Sold By	NetBetShop	NetBetShop
Are batteries included?	No	No
Item Dimensions	7 x 2 x 1 inches	8 x 2 x 4 inches

Do I have to return Xfinity remote?

You will need to return modems, routers, remotes, gateways, television boxes, and the power cords for these devices to Comcast. You can keep the ethernet and coaxial cables.

Is X1 voice remote free?

The new voice features work on both new and old Comcast voice remotes. The new X1 remote is available now to both “eligible new and existing X1 customers” at no additional cost.

Will old Comcast remote work with X1?

There are actually a few different old Comcast remotes that work with the XG1 or the RNG boxes. You have to program the lighter silver with the Red OK button like we did above. The “Platinum” remote is a darker silver and it comes pre-programmed to work with the new system.

Who makes XR11 remote?

Enhance your purchase

Brand	Gadgets World
Compatible Devices	Television
Connectivity Technology	Infrared, Radio Frequency
Battery Description	2 AA batteries
Maximum Range	30 Feet

How do I reset my X1 remote?

1 Factory Reset a Comcast Xfinity X1 Remote

1. Press and hold the Setup button.
2. The LED on the remote will change from red to green.
3. Press 9-8-1.
4. The LED will blink green twice to indicate that the remote was reset.

How do I reset my Xfinity XR11 remote?

If the buttons on your Voice Remote (model XR11) are still unresponsive, you may need to perform a factory reset….To perform a factory reset:

1. Press the Setup button until the LED at the top of the remote changes from red to green.
2. Press 9-8-1.
3. The LED will blink green twice to indicate that the remote was reset.

Do you have to return Comcast remotes?

What do I do with my old Xfinity remote?

Swap Out Your Remote for a New One We recommend that you simply swap out your old or broken remote for a new one at an Xfinity Store near you.

How long does Comcast give you to return equipment?

If you wish to return or exchange an item for any reason, we want to help you take care of it as quickly as possible. You have 14 days from when your device was shipped (or purchased in a retail store) to start a return or exchange. The device must be activated before being returned or exchanged.

How to pair and program Your Xfinity X1 remote?

Press and hold the Microphone (Voice) button and say,”Program remote.”

You can also get there by going to the Settings page,selecting Remote Settings and then Voice remote pairing.

Or you can use our online Remote Code Lookup tool or the Xfinity My Account app.

How do you set up a Xfinity remote?

Make sure you have an active Internet connection.

Make sure the TV Box you are trying to tune is turned on and compatible with the Xfinity TV Remote app for TV control.

Learn more about the Xfinity TV Remote app with these tips.

How to set up a Xfinity remote?

In TV Listings,tap Watch on TV to tune your TV to the selected program in TV Listings.

In TV Listings,tap Watch Channel or the channel number/logo to tune directly to that channel.

In TV Listings,tap Filter in the upper right-hand side of the grid.

In Xfinity On Demand,select Watch XOD to tune your TV to the On Demand program information screen.

How to program a Xfinity remote to your TV?

Go to https://www.xfinity.com/support/remotes in a web browser.

Select your remote control model and click Continue.

If you want to control your TV,select TV,choose the manufacturer,and click Continue to reveal the code (s).