How do I log into Enphase Enlighten?

Open the browser of your choice and navigate to enlighten.enphaseenergy.com or visit enphase.com and open the drop-down menu in the upper right. Tap on the Enlighten Login link. On the Login screen, enter your email address and password and click on sign in.

How do I connect Enphase monitoring?

Access real time data using the Enphase App

1. Enable AP mode on your Gateway.
2. Open the Enphase App.
3. Tap Menu.
4. Tap Devices.
5. Tap Configure under the Envoy.
6. You will see text that guides you to connect to the Envoy.
7. Without closing the Enphase App, open the Wi-Fi settings on your mobile device.
8. Return to the app.

How do you connect Enphase Envoy?

If you have an Envoy-S or IQ Envoy, press and hold the two buttons down for 3 seconds. Release both buttons and all four LEDs will blink green for three seconds to indicate the connection is established. If your Envoy has an LCD, press and hold the menu button on the right side of the Envoy.

How do I find my Enlighten ID?

Log into MyEnlighten. Access the Overview tab. Your system Site ID is the number in the URL in the address bar of your browser.

How do I activate my Enlighten account?

Existing installers: Log into Enphase Installer Platform, click “Add New Activation” in the Installation Status widget. First-time installers: Go to enlighten.enphaseenergy.com/register and complete the form. Your login credentials will be emailed to you. Visit our Getting Started Site to learn more.

What is envoy password?

You’ll be prompted to enter the password for the Envoy, which is the last six digits of the Envoy’s 12-digit serial number. Use the numbers from the Envoy’s network you joined earlier or find the Envoy’s serial number either on the bottom or the back of the unit.

How do I activate my enphase account?

Where is the serial number on Enphase Envoy?

1. On the Envoy LCD or Envoy-R, the serial number label is on the back of the Envoy, near the left mounting bracket.
2. You can get the serial # of your Envoy through the Installer Toolkit app, also.
3. Your installer may have access to this.

Can I use Enphase without Envoy?

Can I use Enphase without envoy? Yes you can.

What is Enphase Enlighten app?

Enlighten is the monitoring experience built specifically for the system owner. Delivering at-a-glance verification, Enlighten gives you the assurance that your Enphase System is performing as expected. – Easily verify system health and performance. – View energy production by month, day, or hour.

How do you activate Enlighten?

Create the Activation Go to http://enlighten.enphaseenergy.com and log in with your username (email) and password. Confirm that you are logged into the correct branch office. If your branch office has not yet been set up in Enlighten, please contact your Enlighten administrator.

How do I reset my Enphase Envoy password?

If you are logged in:

1. Select the Account tab.
2. Click Reset Password from the Account menu.
3. Enter the password fields as indicated.
4. Click Reset Password. Enlighten confirms the change with the Your password has been reset successfully message.

How do I find the IP address of my envoy?

1) Connect a laptop to the Envoy using an ethernet cable. 2) Open a web browser (eg. Google Chrome, Mozilla Firefox, Internet Explorer) and type the address “169.254. 120.1” into the address bar (you should see this IP address on the display of your Envoy).

Can Enphase be used off grid?

Enphase Ensemble Ensemble is a suite of products from Enphase Energy which allow homeowners to have a truly grid agnostic solar system. This means the solar system can be either connected to the grid, operate when the grid is down or be used for off-grid.

How do I add Enphase to my app?

How do I register an Enphase Energy System?

1. Existing installers: Log into Enphase Installer Platform, click “Add New Activation” in the Installation Status widget.
2. First-time installers: Go to enlighten.enphaseenergy.com/register and complete the form.
3. Self-installers: Click on the “Self-installed” checkbox.