How do I factory reset my K9 air cap3502i?

How to factory reset (hard reset) Cisco AIR-CAP3502E-A-K9 :

1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds.

How do I reset my air cap3702i B K9?

This is a standard process that works for me on some other models. 2.) I also tried the 30-30-30 process. Power up AP, hold mode button for 30 seconds, remove power and continue to hold mode button for 30 seconds, provide power again and continue to hold mode button for another 30 seconds.

How do I reset my Cisco Air cap2702i D K9?

Here is the procedure:

1. Disconnect power from the AP or Disconnect the power jack for external power or the Ethernet cable for inline power.
2. Press and hold the MODE button while you reconnect power to the AP.
3. Hold the MODE button until the Status LED turns amber, and then release the button.

How do I Reset my Cisco AP to factory settings?

Reset Cisco Wireless AP to factory defaults

1. Connect the console cable.
2. Unplug the power or network cable if connected to a POE switch.
3. Press and hold the Mode button.
4. Plug the power back into the AP.
5. Wait until the output on the console says button is pressed.

How do I Reset my Cisco Air ap1142n a k9?

To reset the AP, try these steps: Step 1 Disconnect power from access point. Step 2 Press and hold MODE button while you reconnect power to the access point. Step 3 Hold the MODE button until the status LED turns amber, and release the button.

How do I reset my Cisco Air ap1142n a k9?

Can you Reset an access point?

Resetting the access point using the Reset button Press and hold the Reset button of your access point for 30 seconds. Once the access point is reset, perform a powercycle. Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid.

How do I reset my ubiquiti to factory settings?

Reset Button This button serves two functions for the UniFi Switch: • Press and release the Reset button to restart the device. Press and hold the Reset button (for at least five seconds) to restore the device to its factory default settings. System LED State Status Flashing White Initializing.

How do I reset my Ubiquiti controller?

Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Alternatively, the UniFi AP may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter.

How do you wipe a ubiquiti switch?

Press and hold the Reset button (for at least five seconds) to restore the device to its factory default settings. System LED State Status Flashing White Initializing. Steady White Factory defaults, waiting for integration. Alternating White/Blue Device is busy; do not touch or unplug it.

How do I reset my Cisco Air lap1142n e K9?

Step 1 Disconnect power from access point. Step 2 Press and hold MODE button while you reconnect power to the access point. Step 3 Hold the MODE button until the status LED turns amber, and release the button.

How do I factory reset my Ubiquiti AP Pro?

Reset This button serves two functions for the UniFi AP-PRO: • Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more then five seconds.

How do I reset my cisco Air ap1142n a k9?