How do I change the display on my Harmony remote?

Start‑up screen

1. From your Harmony touchscreen remote, tap the Menu icon.
2. Next, tap Settings > Activities > Start‑up Screen.
3. Tap the Activity you want to modify and select the new screen.
4. Finally, tap Done to save your changes.

Why is my Harmony app not working?

Restart/reboot your Harmony remote (and hub), mobile device and Wi‑Fi router. For mobile devices, turn off then back on (or toggle) Wi‑Fi as well as Bluetooth. Make sure the Harmony mobile app and hub are on the same Wi‑Fi network.

Why is my Harmony Hub not working?

If Harmony Hub isn’t discovering or connecting to your Wi‑Fi network, try the following: Ensure your Wi-Fi password doesn’t contain an emoji — they are not supported by Harmony. Unplug the hub from the power adapter, wait 10 seconds and then plug it back in. The Hub will take 30 seconds to power on.

How do I restore my Logitech to factory settings?

Press and hold the Menu button (located above the Channel Up button) and the Off button together for 20 seconds. The remote screen will turn off, then turn on again displaying the image of a remote and a circular arrow. After a few seconds your remote will be restored to factory defaults and you may sync again.

How do you turn on HDMI on Harmony remote?

Press the Setup button and select Video. Select HDMI Setup followed by HDMI CEC. Set Power Off Control, TV Audio Switching, Touch Play and Touch Standby to off.

How do I unfreeze my Harmony remote?

Just hold down the Off button at the top of the remote for 15 seconds and then power it back up again. For hub-based remotes or the Harmony Express with its remote blaster, you might need to reboot the hub or blaster instead. To reboot either device, unplug it for 10 seconds and then plug it back in.

What does green light mean on Harmony Hub?

Green rapid pulse. The Hub is sending a command to one of your devices. Commands are being sent to one or more of your devices using IR or Bluetooth. Commands sent over Wi‑Fi to a Philips hue bridge will not cause the LED to blink.

Is Logitech Harmony discontinued?

Logitech’s announcement that it has ceased production of Harmony marked an important milestone in the decline of a once critical product category, the universal remote control.

How do I troubleshoot my Harmony remote?

If Harmony stops sending commands or if the Harmony Express app is unable to discover your blaster, rebooting your Harmony blaster will often resolve the problem. To reboot your Harmony blaster, disconnect the power cable and wait 10 seconds, then connect it again. It will take about 30 seconds to power back on.

Why is my Harmony Hub red?

The Harmony hub solid Red light happens when the harmony hub is not available, most commonly because it is either syncing with the cloud account or downloading a firmware update or your Wi-Fi is offline.

Are there any reports of the harmony not responding to touch?

There have been a fair number of reports of the Harmony Elite and Harmony 950 not responding to touch. In some instances, this is intermittent and only certain parts of the touchscreen become unresponsive, like the Activities and or Devices ‘button’. Some users have reported that the screen will only respond after multiple presses.

Why is my Harmony Touch/ultimate/elite not syncing or updating?

Sometimes, you may find that your Harmony Touch/Ultimate/Elite is looking for a Hub (that may no longer exist), or is frozen, failing to boot, or is having trouble syncing or updating. Note that there are no hardware fixes available to recover these controllers if they have become ‘bricked’ and can no longer power-on or complete the boot-sequence.

How do I update my Harmony remote to the latest version?

If you are not able to Sync using the MyHarmony desktop software, then you may be able to complete the update by using the Harmony mobile app (iOS or Android). Place the remote into the charging cradle and connect your Hub to the power supply. Launch the app and try to Sync or use the ‘New Setup’ option.

Why am I stuck on the myharmony splash screen?

If you are stuck on the MyHarmony splashscreen (the 1st screen that appears on the remote), or the boot sequence ‘loops’ – repeatedly displaying the splash screen, turning off, and starting again, then some users have reported that, in the middle of the Factory Reset, they USB-connect the remote and do a Sync using the desktop software.