Do PVC pipe deer feeders work?

You can also use a straight piece of PVC without the elbow and have it a few inches off the ground so when they eat more drops. A friend of mine did that and it worked well.

How high off the ground should a deer feeder be?

The optimal height for most deer feeders is approximately 40 inches, but this can be limited due to a myriad of factors. For example, putting enough legs on the feeder to get it this high may make it difficult to fill the feeder. This height measures from the ground to the port of the gravity feeder.

What time should a deer feeder go off?

In a wide field, you may see better results by running the feeder closer to sunrise and sunset. Deer tend to like open areas more at those times. Next to tree cover, you may get deer using it for longer periods, since they are more comfortable next to the woods.

What can you put in a deer feeder besides corn?

Some good fall food sources include hard mast (e.g., oak acorns, beech nuts, chestnuts, hickory nuts, etc.), soft mast (e.g., apples, pears, persimmons, etc.), and agricultural crops (corn, soybeans, brassicas, cereal grains, etc.).

Can you have too many deer feeders?

Registered. First in some respects your buddy is correct, there is no such thing as too many feeders. The deer will only eat what they want or need.

What is the cheapest way to feed a deer?

You can purchase mineral blocks or salt licks specifically for deer and leave some on a feeder around your land. Salt is an extremely cheap commodity and it is also a very easy thing to find. You can also mix nuts and other foods around the feeder.

What is the best time of day to feed deer?

Best Times to Set Your Deer Feeder

• Dispense feed once early in the morning and once in the afternoon for a few seconds each time.
• Or, dispense feed close to hunting time for a few seconds.

Can you build a homemade deer feeder from steel drum barrels?

While those homemade deer feeders are easy to build, they allow all sorts of wildlife to feast on the corn. In this article we are going to look at building a homemade deer feeder from a steel drum. This feeder will have three legs, motor, timer and battery. Steel and plastic barrels both have their ups and downs. Plastic barrels do not rust.

What is the best material for a bird feeder barrel?

This feeder will have three legs, motor, timer and battery. Steel and plastic barrels both have their ups and downs. Plastic barrels do not rust. Steel barrels rust, but are rodent proof.

How to make a homemade deer feeder?

Tripod Barrel Homemade Deer Feeder For this project, you can mount a barrel on top of a sturdy tripod, then attach a 3-head feeding tube to its bottom for the treats to flow out. This tube can hold 350 pounds of feed at one time. It is also easy to mount with four bolts.

How to build a deer feeder with a 5 gallon bucket?

While there are many creative ways to use a 5-gallon bucket to build deer feeders. But there is no simpler idea than utilizing just an old bucket and a 45-degree elbow. You just use the bucket to hold the feed and create a wooden dowel inside. Whereas the 45-degree elbow helps store the little pile of corn for the deer to feed on.