WHAT IS interface range command?

The interface range command allows you to configure multiple interfaces at once. The interface range command is particularly useful because switches have many interfaces and the same settings are often applied to multiple interfaces.

How do you set the interface range in a juniper switch?

To specify a member range, use the member-range statement at the [edit interfaces interface-range name ] hierarchy level. To specify interfaces in lexical order, use the member-range start-range to end-range statement.

How do you use the interface range command in Juniper?

List of Interface Range Commands in Juniper

1. 1 – Disable ports. # set interface interface-range SCOPE member-range ge-0/0/0 to ge-0/0/3. # set interface interface-range SCOPE disable.
2. 2 – Add vlan to ports. # set interfaces interface-range SCOPE unit 0 family ethernet-switching vlan members vlan20.

How do I configure multiple Cisco switch ports at the same time?

Configuring Multiple Switch Ports on the Same VLAN

1. In Dashboard, navigate to Switch > Configure > Switch Ports.
2. Check the boxes next to each port to be updated.
3. Click Edit, specify the VLAN, and click Update.

How do I find my interface configuration in Juniper?

To display the current configuration for a Juniper Networks device, use the show command in configuration mode. This command displays the configuration at the current hierarchy level or at the specified level.

How do I delete an interface in Juniper?

– To Juniper disable interface:

1. root@Juniper# set interfaces ge-0/0/1.0 disable << This is cisco equivalent of “shutdown”
2. root@Juniper# delete interfaces ge-0/0/1.0 disable << This is cisco equivalent of “no shutdown”
3. root@Juniper#show ge-0/0/1.0. root@Juniper# run show interfaces ge-0/0/1.0 terse.

How do I add a description to Juniper?

To add the description, enter the address-book hierarchy, and then use the keyword annotate .

How do I change the VLAN of an interface?

To change the VLAN for a COS device, use the set vlan command, followed by the VLAN number, and then the port or ports that should be added to that VLAN.

What does Spanning Tree Portfast do?

Portfast feature causes a switch port to enter the spanning tree forwarding state immediately, bypassing the listening and learning states.

How do I change the VLAN on multiple ports?

What is the range of VLAN?

VLAN Ranges

VLANs	Range	Usage
1	Normal	Cisco default. You can use this VLAN but you cannot delete it.
2-1001	Normal	For Ethernet VLANs; you can create, use, and delete these VLANs.
1002-1005	Normal	Cisco defaults for FDDI and Token Ring. You cannot delete VLANs 1002-1005.
1006-4094	Extended	For Ethernet VLANs only.

How do I create a VLAN range on a Cisco switch?

To Create a VLAN in the extended range use “set vlan vlan-id [name name]” command. Here the vlan-id would be a number from 1025 to 4096. Numbers 1001 to 1024 are reserved by Cisco and cannot be configured.

How do I show ip interface brief in Juniper?

1. show interfaces (IP-over-IP) content_copy zoom_out_map.
2. show interfaces brief (IP-over-IP) content_copy zoom_out_map.
3. show interfaces detail (IP-over-iP) content_copy zoom_out_map.

How do I get into Juniper config mode?

Switch Between Operational Mode and Configuration Mode

1. When you log in to the device and type the cli command and press Enter, you are automatically in operational mode:
2. To enter configuration mode, type the configure command or the edit command in CLI operational mode.

How do you show interface in Juniper?

Use the show interfaces command to view the interface speeds. (Optional) Display the specified level of output. (Optional) Display interface description strings. (Optional) Display media-specific information about network interfaces.

What are interface ranges?

Interface ranges represent similar type of interfaces with common configurations that are grouped together. The ranges containa a name, a range and the configuration statements which is common to all the similar interfaces.

How to configure interfaces in a group of interfaces?

You first specify the group of identical interfaces in the interface range. Then you can apply a common configuration to the specified interface range, reducing the number of configuration statements required and saving time while producing a compact configuration.

What is the interface range configuration mode?

When you enter the interface range configuration mode, all command parameters that you enter are attributed to all interfaces within that range until you exit this mode. The Interface Range Specification feature makes configuration simpler and quicker because –

What is interface range command in Linux?

interface range command The interface range command allows you to configure multiple interfaces at once. The interface range command is particularly useful because switches have many interfaces and the same settings are often applied to multiple interfaces. interface range command format