How do I log into my Cisco phone?

To Log In to your phone using Extension Mobility:

1. Locate the Cisco 7841 phone at your temporary work station.
2. Press the APPLICATIONS.
3. Use the Navigation button to select Extension Mobility.
4. Enter NetID by typing into the keypad in a text fashion.
5. Enter PIN: 123456 (assuming you have not changed this PIN previously).

How do you wipe a Cisco phone?

Press and hold # button while plugging the phone back in. Press 123456789*0# in sequence. After you press these buttons, the phone goes through the factory reset process.

How do I log into my IP phone?

Open your web browser and enter the IP address on the address bar: Some phones require a secure connection to your network before the web interface can be accessed. Use https:// if entering the IP address to the address bar does not load the page.

How do I log into my Cisco 8841?

To log on to an available phone: ▪ Press Applications button. Select Extension Mobility. Enter your User ID: BlueNet Username ▪ Enter Default PIN: Cisco Phone PIN ▪ Press Submit softkey. Note: First time logging -in you will be required to change your PIN.

How do I setup my Cisco phone?

Use Cisco Unified CallManager Administration to modify > Device > Phone > Phone Configuration. URL of the help text that appears on the phone. Use Cisco Unified CallManager Administration > > Device > Phone > Phone Configuration. URL that the phone uses to validate requests made to the phone web server.

How do I access my Cisco IP Phone web interface?

How to access the web interface of Cisco 8861 or 7841 phone?

1. Press the Settings button.
2. Select Status.
3. Select Network Status.
4. Select either IPv4 Status or IPv6 Status, depending on which is used.
5. Note the IP Address.

How do you unlock a Cisco phone?

1. Unlock Settings – *, *, #.

1. Go to the Settings page of the phone.
2. While in the settings page, press *, *, # (star, star, pound) about 1/2 second apart.
3. The phone will display “Settings Unlocked” and allow you to make changes.

How do I reset my Cisco phone password?

Step 1 In the Messaging Assistant, from the Passwords menu, select Change Cisco PCA Password. Step 2 On the Cisco PCA Password page, enter your current password. Step 3 Enter your new password, then enter it again to confirm it. Step 4 Select Save.

How do I access my Cisco phone remotely?

Control Remotely Cisco IP Phones

1. Login to Cisco Unified Communication Manager.
2. Go to User Management > Application User > Add New.
3. Enter the User ID –
4. Enter the User ID’s Password –
5. Enter the Confirm Password –
6. Assign CTI Roles and SuperAdmin Roles for the User.
7. Click on Save.

How do I access my Cisco IP phone web interface?

How do I use my Cisco desk phone?

1. Procedure.
2. Step 1 Verify that you are on an active call (not on hold).
3. Step 2 Press and release the hookswitch to get a dial tone.
4. Step 3 Enter the transfer recipient’s phone number.
5. Step 4 Wait for the recipient to answer. You may skip to Step 5 while the call is ringing.
6. Step 5 Hang up. The transfer is complete.

How do I connect my Cisco phone to WiFi?

Enable the phone’s Wireless Connection

1. Power ON the phone using the power adapter that came with the device.
2. Press the Setup button on your Cisco phone.
3. Go to Network Configuration and then press the Select key.
4. Go to WiFi and then press the phone’s Right Arrow key to toggle WiFi ON, and then press Set.

How do I connect my Cisco IP phone to my computer?

First, disconnect the Ethernet cable from the computer and attach it to the network port on the back of your phone. Next, use the Ethernet cable included with your phone to connect the access port on the back of your phone to your desktop computer. Your Cisco IP Phone now shares a network connection with your computer.

What is the default password for Cisco IP Phone?

Enter the password of the device in the Password field. The default password for the administrator is admin and for the user it is cisco. Note: If you forget the password, you can reset the phone adapter to factory defaults which in turn returns the device to the default login.

How do I know if my Cisco phone is unlocked?

Cisco Phone Cheat Codes

1. Go to the Settings page of the phone.
2. While in the settings page, press *, *, # (star, star, pound) about 1/2 second apart.
3. The phone will display “Settings Unlocked” and allow you to make changes.

What do I do if I forgot my Cisco voicemail PIN?

If you forget your PIN, use the Messaging Assistant web tool to change it, because you are not required to enter an existing PIN to change it there. Step 1 In the Messaging Assistant, from the Passwords menu, select Change PIN. Step 2 On the PIN page, enter your new password, then enter it again to confirm it.

What is the PIN for Cisco phone?

24726
When there is no User ID or PIN associated with a phone, the phone uses a default PIN of 24726. Step 1 Access the Cisco Unified Communications Manager administration.

Can I use my work Cisco IP phone at home?

Using Your Desk Phone at Home Companies that have Cisco Expressway will be able to bring Cisco 7800 and 8800 series phones home. They can register phones securely back to the corporate phone system. To power the phone, you will need a power supply or power injector. The phone can also directly connect to a home router.