How do I fix code F01?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.

What does f1 mean on the dryer?

This code indicates that the thermistor has failed. The dryer won’t dry without a functioning thermistor because this is the mechanism that measures the internal temperature of the dryer so the machine can safely and efficiently dry the clothes.

How do I reset my Whirlpool Duet dryer?

If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.

What does f1 mean on Whirlpool washer?

Usually, it’s a problem with the control board. By replacing the control board, you should be able to fix the problem. However, it might also be a problem with the hose, something might be stuck in the hose.

Does unplugging a dryer reset it?

Reset your dryer Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

Will dryer start if thermal fuse is blown?

Will the dryer run if the thermal fuse is blown? Unlike a thermostat that can reset itself, once a dryer thermal fuse blows, it will need to be replaced with a new one before the dryer will run.

How much does it cost to replace the control board on a Whirlpool dryer?

$493.97. Main control board. NOTE: This part is often misdiagnosed. Please enter your dryer model# in our repair help section for additonal repair help.

What does E1 F1 mean on a Whirlpool dryer?

A “F1E1” code in the display indicates there may be an issue with the control unit or the associated wiring. Touch POWER, select a cycle, then hold START/PAUSE button to start the dryer. If this is unsuccessful, unplug the dryer.

Where is the dryer reset button?

Often, dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then press this reset button.

How do I know if my thermal fuse is blown?

To test if your thermal fuse has blown, touch the right side of your multimeter lead to the right side of the fuse, and repeat with the left multimeter lead. If the multimeter needle fails to move, this indicates the thermal fuse has blown.

How long should a Whirlpool Duet dryer last?

Generally, Whirlpool dryers have a lifespan of 8-12 years. However, some may last longer if you maintain it properly. But if your Whirlpool dryer is at least ten years old, replacing it is more reasonable. Repairing the 10-year-old dryer will likely cost less.

Can a dryer still run if the thermal fuse is blown?

What does F1 mean on a whirlpool Cabrio dryer?

When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn’t work, you will need to replace the control board. What does f1 on my dryer mean?

What does F 01 mean on Whirlpool duet dryer?

F01 means that your main relay control board for the dryer has an internal short inside itself. If you pull the dryer forward and remove the screws coming in from the back of the top panel, the top panel will pull straight back, up, and off. The control board is mounted to the left side panel over top the drum.

What does Maytag dryer code F01 mean?

What does F01 mean on a Maytag Bravos quite series 300 dryer. 1 Answer. Brianna Stanley March 20th, 2017. The F1 fault code on this washer indicates that the water level pressure transducer signal is out of range. The pressure transducer air hose tubing being pinched or crimped can cause this.

What does PF code mean in a whirlpool electric dryer?

– Inspect household fuses or breakers. – Close the dryer door firmly. – Press and hold the “Start” button for five seconds. – Check the display on the dryer for error codes. – Press the “Start” button and hold for several seconds to restart the dryer if “PF” appears on the display.