How do I pair my Plantronics Voyager Legend with my PC?

Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the call control button and set the headset aside. Plug the Bluetooth USB adapter into the computer. Once the devices pair successfully, the light on the headset stops flashing.

How do I connect my Plantronics Voyager focus UC to my laptop?

Your Bluetooth USB adapter comes pre-paired to your headset.

1. Insert the Bluetooth USB adapter into your laptop or PC.
2. Pairing is successful when you hear “pairing successful” and the USB adapter LED is solid blue.

How do I get my Plantronics headset to work on my PC?

Plug the headset directly into the PC and not into a hub or docking station. If you are using a desktop, plug your headset into a rear USB port if applicable. Make sure the headset is selected as the default device in the PC under both the Sound Recorder and Playback options.

How do I connect my Plantronics headset to my computer via USB?

Plug the Bluetooth USB adapter into the computer. Pinch the button on the adapter for 5-6 seconds until the light starts flashing an alternating red-blue. Once the devices pair successfully, the lights on the headset and adapter stop flashing.

Why is my Plantronics headset not connecting?

Charge your headset’s battery. Often, a headset’s inability to pair with the cellphone is due to a simple lack of power. Place your headset on the charger and charge it fully to rule out this possibility. While you’re at it, charge your phone battery too.

How do I pair my Plantronics Voyager Legend UC Bluetooth headset?

Turn the headset on and then put it on. Activate Bluetooth on your phone and set it to search for a new device. Select “PLT_Legend.” If your phone asks for a passcode, enter four zeros (0000); otherwise, accept the connection. Once successfully paired, you will hear “pairing successful.”

How do I use my Plantronics Voyager headset with my laptop?

Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. The USB adapter LED flashes blue and then turns solid blue to indicate the headset is connected to the USB adapter. If you are wearing your headset you will hear “PC connected” to indicate the connection has been established.

How do I connect my Voyager focus to my computer?

To a Computer Via Bluetooth Dongle

1. Insert the Bluetooth USB dongle into a USB Port of your computer.
2. Pairing is usually automatic.
3. When paired you will hear “Pairing Successful” in the headset.
4. You will need to go into the computer settings and set Plantronics BT600 as the default device.

How do I setup my headset for Windows 10?

On your Windows 10, go to Devices > Bluetooth and other devices > Click on Add Bluetooth and another device button. Click on Bluetooth. It will then search for the headset, which is already in pairing mode. Once you see in the list, click to pair.

How do I connect my Plantronics wired headset to my laptop?

If your headset features a USB connector, find an unused USB port on your computer. Plug the headset USB connector into the USB port. Your computer should recognize and configure the headset for use and may display a notification message in the lower-right corner when ready.

How do I connect Plantronics wired headset to laptop?

How do I reset my Plantronics Voyager focus UC?

Reset sensors Choose: With your headset powered on, charge your headset on the charge stand for 10 seconds. Press and hold both the Mute and Play/pause buttons for more than 4 seconds until the LEDs flash purple twice, being careful to not touch the earcup padding or allow it to come in contact with surfaces.

How do I pair my Plantronics Voyager headset?

First Time Pairing

1. Turn the headset on and then put it on.
2. Activate Bluetooth on your phone and set it to search for a new device.
3. Select “PLT_Legend.” If your phone asks for a passcode, enter four zeros (0000); otherwise, accept the connection.
4. Once successfully paired, you will hear “pairing successful.”

How do I connect my Plantronics Bluetooth headset to my laptop?

Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons.

How do I get Windows 10 to recognize my headphones?

Manually show and enable headphones in playback devices

1. Right-click the sound icon at the bottom right part of the screen, then select Open sound settings.
2. Go to Manage sound devices.
3. Check the devices under Disabled.
4. If you see your headphones there, click on your headphones’ name, then click on Enable.

How do I use my headset mic on PC with one jack Windows 10?

Simply insert the headset into that port and you’re good to go. However, if your computer possesses two ports, including a mic port and headset one, select to plug your single jack headphone in the second port with a headset input. This will assist you in listening to the sound and using the speaker as well.

How do I update my Voyager focus UC?

Plug your headset into your computer using your USB charging cable, and then click Continue. On the Personalize Your Settings screen, set any desired options. Click Update Your Headset. On the Review Settings screen, click Update.