Are line out converter any good?

If your stereo doesn’t have preamp outputs, or not enough of them, a line output converter is a great solution. You connect the stereo’s speaker wires to the LOC’s inputs and use RCA cables to run the signal from the LOC to your amplifier.

Do you need to ground a line out converter?

Anyways this type of line out converter needs to be hooked up to both constant power and ground in addition to the speaker wire inputs. This system uses a signal sensing input to then provide a dedicated remote output for your amp. If you have a test light or multimeter check that your power connections are correct.

Do line out converters need power?

Active Line Out Converters An Active Line Out Converter is a more advanced version of the standard passive line out converter. These require 12v power to output a signal. These converters also handle up to 400 watts per channel meaning OEM Amplified systems and high powered systems are not an issue.

How do you connect a line output converter to an amplifier?

Use butt connectors (some prefer to solder) and wire crimpers to finalize. Add electrical tape around the connection and proceed until all wires are correctly connected together. Lastly, you will plug in the RCA cables to the line output converter and run and connect the RCA cables to the amplifier.

What’s the brown wire on line out converter?

There are usually 1 or 2 extra wires on a line output converter (often brown in color). These wires are used to ground the shield of the RCA output cables to the head unit. Some amplifiers work fine without them, others don’t.

How do I tap my rear speakers into subs?

Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.

What does bypassing factory amp do?

By bypassing the factory amplifier, the music sounds more detailed and clear than it did when he used the amplifier integration harness. Whenever there’s one available, we recommend bypassing the factory amp to get better sound. If you’re considering a new stereo for your vehicle, keep this option in mind.

How do I hook up an aftermarket amp to a factory amp?

The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

Do you have to ground a LOC?

A: You don’t have to unless the loc is powered. You can ground it if you want, but you do not need too.

Can you hook up an amp and subs to a stock stereo?

Adding a subwoofer to a factory stereo is an excellent method to boost your sound while retaining your factory controls. The nifty devices can produce bass and sub-bass sounds at low frequencies. Thankfully, it’s pretty simple to wire one into an existing car stereo system.

Can I wire a sub to rear speakers?

Senior Member. Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.

Should you bypass factory amp?

Bypassing the factory amp takes a little more work because you have to run the bypass harness to the factory amp, which is often located in some other part of the car. It’s usually worth the extra effort because you’ll get better sound from your new stereo, even if you’re keeping those factory speakers.

Can you hook subs to a stock stereo?

Does a Line Output Converter need a ground?

Just make sure the wire is solid ground wire and you should be fine. A: You don’t have to unless the loc is powered. You can ground it if you want, but you do not need too.