What size spools for a GSXR 1000?

8mm
Compare with similar items

What are swingarm spools Kawasaki?

These spools are made for use with notched rear stands making it easier to lift the rear of the motorcycle to replace tires, sprockets or to clean the bike. These spools are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry for over 25 years.

Can you use a paddock stand without bobbins?

Front wheel paddock stands These can either use hooks, bobbins or padded pegs, which will lift via the bottom of the forks.

Do you need front and rear paddock stands?

You don’t have to but it can have its advantages. If you use a front and rear paddock stand when storing the bike, you keep the weight off the tyres, which in turn can save them from deforming, cracking or getting a cold-related surface burn. It all depends on how long you’re going to store the bike for.

Do Frame sliders damage the frame?

Because of the additional leverage exerted by the mount, it’s possible that the slider could actually damage the frame — the direct opposite of the slider’s intended task.

Are motorcycle sliders worth it?

For those purposes, a longer slider is better since it props your bike up and keeps more stuff off the ground. However, that long slider is more likely to bend and break or damage its mounting point if a lot of force is applied to it in a faster crash. Racers and track riders are dealing with a different scenario.

Should you store motorcycle paddock Stand?

An excellent option for keeping your bike in a solid, sturdy position and to keep the bike’s weight off its tyres is to use one (or two) paddock stands. If you do not have the luxury of paddock stands, it is not a bad idea to slightly over-inflate your tyres over winter to help them keep their shape.

Are crash bobbins worth it?

A cracked or broken engine casing could very much mean the end of your day. Smaller crashes leave next to no damage – With crash bungs installed, you’re more likely to be able to just pick the bike back up and ride back in after a small, slow speed ‘get off’.

What is the purpose of a motorcycle slider?

Slider options Sliders are almost always made out of a plastic material which protrudes out of a motorcycle in order to allow your bike to slide on the road surface in the event of a fall. Sliders are meant to absorb the slide impact instead of having your precious and expensive motorcycle components take the hit.

How do I store my motorcycle for 10 years?

Long-Term Motorcycle Winterization Storage

1. Surface Prep. Give your bike a thorough cleaning before putting it away — letting bug guts or water spots sit on your paint can corrode the finish.
2. Tend to the Battery.
3. Prep the Fuel System.
4. Replace Engine Oil.
5. Don’t Forget the Tires!
6. Cover It Up.

How often do you need to start your motorcycle?

Motorcycle owners should ensure they start their motorcycle at least once every 7 days and ride it for 10-15 miles. This will help eradicate condensed moisture in the motorcycle oil, lubricate the engine, prevent rust, corrosion, clogged filters, tire deterioration and battery degradation.

How do I protect my motorcycle from drops?

How To Keep Your Motorcycle Intact In A Crash

1. Frame Sliders. The most common protection part for street bikes, frame sliders attach to a motorcycle’s frame, engine block or both with sturdy bolts.
2. Rearsets.
3. Front Axle Sliders.
4. Swingarm Spools/Sliders.
5. Engine Covers.
6. Track Fairings.
7. Tank Covers.
8. Engine Guards.