How do you use a fire extinguisher step by step?

1. PULL… Pull the pin. This will also break the tamper seal.
2. AIM… Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire.
3. SQUEEZE… Squeeze the handle to release the extinguishing agent.
4. SWEEP… Sweep from side to side at the base of the fire until it appears to be out.

What should you do before using an extinguisher on a fire?

Before Using a Fire Extinguisher

1. Activate the building fire alarm system or call 911.
2. Announce the fire to others in the building.
3. Determine if the fire is spreading.
4. Determine if the fire is small and contained enough to use a fire extinguisher.

What is the proper way to use a fire extinguisher quizlet?

Terms in this set (4) Pull the pin. Aim the extinguisher at the near edge and bottom of the fire. Squeeze the handle to discharge the extinguisher. Sweep the extinguisher from side to side at the base of the fire.

What should you do after you use a fire extinguisher?

Spray any caked-on residue with a mixture of rubbing alcohol and warm water. Wipe with a damp rag. A 25 to one ratio of hot water to vinegar can neutralize residue from potassium bicarbonate and sodium bicarbonate. Spray it on and wipe with a damp rag.

How do you use a fire extinguisher safety meeting?

The PASS acronym was developed to allow people to remember the basic four steps to properly using a fire extinguisher.

1. P- Pull. Pull the pin.
2. A- Aim. Aim the stream towards the base of the fire.
3. S- Squeeze. Squeeze the lever slowly and evenly.
4. S- Sweep.
5. Get the free P.A.S.S.

What is the safety precautions about using fire extinguisher?

When operating a fire extinguisher, tell remember the word PASS.

• Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
• Aim low. Point the extinguisher at the base of the fire.
• Squeeze the lever slowly and evenly.
• Sweep the nozzle from side-to-side.

What should you check before using a fire extinguisher?

Confirm the extinguisher is visible, unobstructed, and in its designated location. Verify the locking pin is intact and the tamper seal is unbroken. Examine the extinguisher for obvious physical damage, corrosion, leakage, or clogged nozzle.

How do you use a fire extinguisher safely?

The acronym PASS is used to describe these four basic steps.

1. Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal.
2. Aim. Approach the fire standing at a safe distance.
3. Squeeze. Squeeze the handles together to discharge the extinguishing agent inside.
4. Sweep.

What are the correct steps in order for using a fire extinguisher quizlet?

What are the 3 methods of extinguishing a fire?

The basic methods for extinguishing a fire are to suffocate it by ensuring that it cannot have access to oxygen, to cool it with a liquid such as water which reduces the heat or finally to remove the fuel or oxygen source, effectively removing one of the three elements of fire.

When should you use fire extinguisher?

You should only consider using a fire extinguisher if all members of your home have been alerted to the fire and the fire department has been called. Also, make sure you are safe from smoke and that the fire is not between you and your only escape route.

When should you use a fire extinguisher at work?

When do you use a fire extinguisher?

1. After the fire alarm has been raised and the building/area evacuation has commenced.
2. The fire is in its very early stages, small in size, contained, and only requires one fire extinguisher.

What is the fastest way to extinguish a fire?

What is the 4 step method for using a fire extinguisher?

Fortunately, there’s a simple, 4-step method you can follow to use a fire extinguisher properly. The fire extinguisher steps method is known as PASS, and each letter in the word PASS (P, A, S, and S) stands for the first word of each step. The PASS method works for many common fire extinguishers.

How do I know what type of fire extinguisher I Need?

The easiest way is to look at the label on the fire extinguisher. It will tell you what type of fire (or fire class) the fire extinguisher can safely put out. Some extinguishers can only put out one type of fire. For example, you may see a fire extinguisher with an “A” rating.

How do you open a fire extinguisher from the top?

Many fire extinguishers have a pin near the handle at the top like the one shown in the image below. Begin by removing that pin. In some cases, instead of a pin there’s been a lock latch you’ll have to release or a puncture level you have to press.

When do you need a portable fire extinguisher?

In order to assist or enable your escape you may need to use a Portable Fire Extinguisher. It is important you know which fire extinguisher you should use in each instance. This user guide explains each type of Portable Fire Extinguisher and how to use it in case of an emergency.