How do you convert an architectural scale?

To convert a scaled measurement up to the actual measurement, simply multiply the smaller measurement by the scale factor. For example, if the scale factor is 1:8 and the smaller length is 4, multiply 4 × 8 = 32 to convert it to the larger actual size.

How do you convert floor plan measurements?

The scale for floor plans can be shown in two different ways:

1. As equivalent measurements, eg 1/8″ = 1′ or 1cm = 1m, “an eighth of an inch represents 1 foot” or “1cm represents 1m”
2. As a ratio eg 1:96 or 1:100, “one to forty eight” or “one to one hundred”

What scale is commonly used in floor plan?

For example, most floor plans and elevations are in 1/8- or 1/4-inch scale, depending on the size of the building and sheet. For residential structures, the 1/4-inch scale is usually used, roughly equivalent to 1:50 in metric scale (Figure 4.5).

How do you scale a plan?

Drawings can be scaled up or down using either a calculator or a scale rule. To scale a drawing using a calculator: divide the measurement by the scale if you want to reduce the drawing in size, or. multiply the measurement by the scale if you want to increase it in size.

How do you convert engineering scales to inches?

To calculate how many inches in the measurement you have, multiply the decimal by 12. For example, if the measurement is 100.2 feet, multiply 0.2 by 12 to get 2.4 inches.

How do you use a metric scale on a floor plan?

For example, a floor plan of a building drawn using a metric scale of 1:100 (pronounced “one to a one hundred”), means that for each unit that is measured on the drawing (the 1), the real world size of it is 100 times larger (the 100) than it appears.

What scale do architects use?

Architect scales, such as 1/4˝ = 1´-0˝ (1/48 size) or 1/8˝ = 1´-0˝ (1/96 size), are used for structures and buildings. They are used to measure interior and exterior dimensions such as rooms, walls, doors, windows, and fire protection system details. Other scale tools include flat scales and rolling scales.

How do you convert scales to engineering drawings?

Converting between representational scales

1. a 1:50 drawing will be twice as big as a 1:100 drawing(100/50 = 2)
2. a 1:500 drawing will be 2.5 times smaller than a 1:200 drawing (500/200 = 2.5)

What does a scale of 1 4000 mean?

The measurement of 10 mm on the plan represents an actual size of 40000 mm or 40 m (4000 x 10 mm).

What does a scale of 1 2500 mean?

Representative Text / Ratio Scale For example, 1:2500 means that 1 cm = 2500 cm. Because 2500 cm is difficult to interpret, we convert it into an understandable unit. In this case, there are 100 centimeters in a meter. When we convert centimeters to meters, 1 cm on the map is equal to 25 meters in real life.