How do I reset my Smart RG router?

Reset the modem: If you need to reset the modem, insert a paper-clip in the Reset hole on the back. Hold for 10 seconds to reset.

What is the default password for Smart RG router?

1.1 (the most common IP for SmartRG routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your SmartRG router is admin. The default password is admin.

How do I connect to my Smart RG WiFi?

SmartRG 808AC

1. When prompted to login with a username and password, use the username and password located on the bottom of the modem.
2. Click Wireless.
3. Click Radio.
4. Set the Wireless Interface drop down menu to 2.4 Ghz.
5. Click Primary Network.
6. Enter your desired wireless network name into the Network Name (SSID) field.

How do I reset my Smart RG WIFI password?

SmartRG Routers Help Forgot Login Password? Try hard resetting your router login. To do this, press and hold the small black button found at the back your router for around 10 seconds. This will reset your router to the factory settings.

How do I reset my Smart RG SR808ac?

To factory reset the SmartRG SR808ac: Using a pin or pencil tip, press and hold the recessed RESET button at the back of the modem at least 1 second.

How do I reset my Smart RG Wi-Fi password?

How do I update my Smart RG router?

SmartRG Router Firmware Updates – Click the Management link on the left side, then Update Software below. – Click the Choose File button, and select the firmware file you just downloaded. – Click the Update Software button. This will take a few minutes, after which your router will reboot.

How can I change my smart Wi-Fi password?

Just follow these steps:

1. Connect your gadget to the WiFi signal of your Smart Bro Pocket WiFi or Smart Bro Home WiFi or PLDT Prepaid Home WiFi.
2. A page with a notice “Your connection is not private” will appear.
3. Enter your username and password.
4. Change your WiFi name and password.

How do I change my DSL username and password?

DSL Modem Wireless Password Change

1. Open an Internet Browser (Safari, Chrome, Firefox, etc.)
2. Enter the username and password.
3. Navigate to the bottom of the page and select Network Settings.
4. Under the tab Basic Wireless Setup.
5. To save all the changes you made, click Apply.

Is Smart RG a router or modem?

SmartRG SR505N – Wireless router – DSL modem – 4-port switch – ATM – 802.11b/g/n – Walmart.com.

What is WPS button on router?

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. This information is provided to help connect your TV, Blu-ray Disc™ player, or other supported home video products to a wireless network using WPS.