What does Liqui Moly ceratec do?
What does Liqui Moly ceratec do?
CERA TEC reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines.
How long does Liqui Moly ceratec last?
With a long-term effect lasting around 50,000 km.
Is LIQUI MOLY approved by Porsche?
The new product from Liqui Moly is officially approved by Porsche for all vehicles that require an oil with the company’s A40 standard. That means pretty much every Porsche with a gasoline motor. The oil is not meant for use in your typical vehicle, only sports cars.
Can I add CERA TEC after oil change?
if you add ceratec for bbq tick prevention then I’d suggest adding some before the oil change and also have some miles on it. Since a lot of owners get the tick after the oil change, there must be something in the oil change process itself that causes it. Like short term oil starvation or so.
Is CERA TEC better than MoS2?
Liqui Moly Cera Tec is similar to MoS2 in the sense that it is also a friction reducer. What differs however is the more advanced formula used to create the low surface friction. Cera Tec works similar to Oil Additive but utilizes tiny ceramic particles in place of MoS2 that is claimed to be stronger.
How often should I use Liqui Moly ceratec?
every 25k miles
We recommend using this product every 5th oil service or every 25k miles. Cera Tec reduces the amount of friction and thereby the wear. This in turn benefits the engine, which is under less load. This can result in a lower susceptibility to repair and longer service life.
How often should I use Liqui Moly CERA TEC?
How do you use Liqui Moly ceratec?
What is Cera Tec and how do I apply it?
- direct addition to the motor or transmission oil (cold or warm)
- ideally, pour in together with fresh oil when changing the oil.
- 300 ml is sufficient for up to 5 liters of motor oil.
- the optimal dosage is about 6 % of the total oil fill quantity.
Can I add ceratec after oil change?
What does ceratec contain?
Cera Tec is a suspension based on a microceramic solid lubricant and chemical active agents in mineral oil. This is how it is applied: direct addition to the motor or transmission oil (cold or warm)
What does CERA TEC contain?
How do you use Liqui Moly CERA TEC?
How often should you use CERA TEC?
Who makes Porsche oil?
Mobil 1
Mobil 1 – The engine oil for your Porsche As Porsche’s global oil co-operation partner, Mobil 1 provides the oil for our racing engines and our standard models. All Porsche vehicles are now filled with Mobil 1 high-performance engine oil in the factory.
Can I use 0W-40 in the summer?
0w40 is multi-grade oil that works well in winter conditions and moderate summer heat.
