How do I reset my Dlink print server?

Step 1: Locate the hole on the back of the print server above the word RESET. Step 2: Using a paper clip, press and hold the Reset button for about 5 seconds and then release. Step 3: After the print server reboots it will be reset to the factory default settings.

How to hard reset d Link DP 301P+?

Reset: Click Applyto reset the DP-301P+. Factory Reset: Click Apply to reset the DP- 301P+ to the factory default settings. You will lose your current settings if you Reset the DP-301P+.

How configure Dlink DP 300U?

Using the USB cable or printer cable, connect one end of the cable to the USB or parallel port of the DP-300U (shown below) and the other end to the USB or parallel port of the printer. Turn ON the printer. Then, plug one end of the power adapter into the DP-300U and the other end into your electric outlet.

Can I Reset my D-Link dp-300 or dp-301 without the password?

In most cases you can reset your D-link DP-300 series or DP-301 series print server yourself even if you don’t know the password or IP. This comes in handy in situations such as when the server has made up its own password after being connected to a new router.

How do I contact D-Link support for my dp-300u print server?

Click on the Helplink from the tools bar of the main screen to enter the Help Page, it provides a link to D-Link™s support website. D-Link™s support website will provide the most up to date information on your DP-300U Print Server. Please check the website regularly for product and firmware updates. 17 TCP/IP Printing for Windows XP

How do I Reset my D-Link router?

Your D-Link router can be reset any time by pressing its reset button. Verify that your D-Link router is currently turned on and plugged into a power source. Locate the round “Reset” port on the back of your router. Use a straightened-out paper clip to press and hold the reset button for 10 seconds. Release the reset button after 10 seconds.

How do I configure the network settings of the dp-300u?

Open your web browser window and type in the IP Address of the DP-300U (192.168.0.10). The web configuration for the DP-300U will appear. Please write down the printer names that appear in this window for future use. Select the Network.