How do you reset a DIRECTV remote RC71?

In quick succession, press the following buttons: 9, then 8, then 1. The green light on your RC71 remote control flashes four times to show you have successfully reset your RC71 remote control to its factory settings. Select Done to complete the resetting process.

What are the buttons on a DIRECTV remote?

Explore your DIRECTV STREAM remote

• The GUIDE button is on the left. Use it to find shows currently airing.
• The home button is in the middle. It displays the home screen.
• The LIST button is on the right. Use it to display your library and DVR recordings.

How do I pair RC71?

First, have your Genie Mini receiver connected and powered on. Next, grab your RC71 remote and simultaneously hold the “MUTE” + “ENTER” buttons until you see a box appear on your TV screen that says “Applying IR/RF Setup. Please Wait” (this appears after about 5 seconds of holding those buttons).

What is the difference between RC71 and rc73?

There are no differences between them. You own everything but the receivers to replace. They are cheaper online. *I am not a DIRECTV employee, and the views and opinions expressed on this forum are purely my own.

How do I resync my DIRECTV remote?

Make sure your remote is paired with your receiver.

1. Point the remote at your Genie, Genie Mini, or Wireless Genie Mini.
2. Press and hold MUTE and ENTER at the same time on your remote.
3. The screen displays Applying IR/RF Setup. The remote is synced.

What do the colored buttons on a DIRECTV remote do?

If you’ve highlighted something in the playlist, pressing {RED} will delete it. If you’re in the guide, pressing {RED} will go back in time 12 hours (but not further back than the present time.) Pressing {REWIND} will do this too. On sports channels, {RED} gives you a ScoreGuide app.

Where is the mode switch on a DIRECTV remote?

Find the MODE switch at the top of the remote, and slide it over to TV. Press and hold the MUTE and SELECT buttons at the same time until a green light flashes twice from the top of your remote.

What is the difference between rc71 and rc73?

How do I sync my DIRECTV remote to my box?

How do I know if my DirecTV remote is IR or RF?

Press and hold the MUTE and ENTER buttons. Stop when the green light at the top of the remote blinks twice. When the TV screen displays Applying IR/RF setup, you are in RF mode and ready to program the remote.

What is the difference between IR and RF on DirecTV?

IR stands for Infared and means the remote must be pointed directly at the receiver. RF stands for Radio Frequency and means the remote is multi-directional.

How do I reset my DIRECTV remote after I change the battery?

Press and hold MUTE and SELECT together until the light flashes three times. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I reset my DIRECTV remote control?

What do the yellow blue red and green buttons do?

These colored buttons are designed for use with certain Blu-ray Disc® (BD) movie titles to access particular features or software on the disc. See the documentation provided with your BD movie to see if these buttons can be used.

How to program Direct TV remote rc73?

Point your remote at your Genie HD DVR,Genie Mini,or Wireless Genie Mini

Similar to the previous instructions,press and hold MUTE and SELECT buttons.

Your TV will display “Applying IR/RF setup” message to indicate that you are in RF mode

Turn on your DIRECTV Ready TV

Repeat steps 2 (press and hold MUTE and SELECT buttons)

How do you program a DirecTV remote for a TV?

At the top of the remote,slide the mode switch to TV.

Press and hold the MUTE and SELECT buttons at the same time. Stop when the green light at the top of your remote flashes twice.

Enter 960 using the keypad on the remote control. The green light should flash twice again.

At the top of the remote,slide the mode switch to the DIRECTV logo.

How to get a replacement DirecTV remote?

Open the myAT app on your mobile device.

Select Manage DIRECTV package.

Select View or change package.

Scroll to My equipment and tap Order,set up or return.

Select Order a remote,choose your remote type and Add it to your cart.

Select Continue to review your cart and Submit order.

How to reset DirecTV remote rc73?

– If you have an extra Genie or Genie Mini, Your TV will show “ Applying IR/RF mode “ – Start the TV with which you want to pair your remote. – Click on the MENU button of your Remote. – Go to SETTINGS & HELP and then to SETTINGS to REMOTE CON TROL and then PROGRAM REMOTE. – Follow the directions displayed on the screen to complete the pairing.