Where is the fuse box on a 2004 PT Cruiser?

27 Answers The interior fuse box is typically located either on the left-hand side of the dashboard, under a panel which is covered when the vehicle door is closed, or underneath the steering wheel area visible with your head looking up under the driver’s seat towards the dash.

Where are the fuses on a Chrysler PT Cruiser?

The fuse access panel is on the left side of the instrument panel next to the steering column. To remove the panel, pull it out, as shown. A label identifying the components and circuits is located on the inside of the cover.

What is a IOD fuse?

The ignition Off Draw (IOD) fuse is used to prevent battery discharge during shipping or long-term storage of the vehicle. The IOD fuse is located in the Total Integrated Power Module (TIPM). If the fuse is not completely inserted, partial contact of the fuse terminals could occur.

Does a TIPM need to be reprogrammed?

Even though technically the TIPM does not need to be programmed, it does need to be configured to the car. Therefore, a “Restore Vehicle Configuration” will be needed, which requires the VIN to be entered into the TIPM.

Where is the passenger side fuse box?

The passenger compartment fuse box is fitted behind the glove box. To access the fuses, open the glove box and then pinch the top of the support stays (arrowed), and lower the glove box into the footwell. A label on the rear of the glove box shows the circuits protected, the fuse values and their locations.

What does the TIPM control?

TIPM is an acronym for Totally Integrated Power Module. The TIPM controls the distribution of power throughout the entire vehicle via fuses and a computer.

Where is the fuse box on a Chrysler PT Cruiser?

Cigar lighter / power outlet fuses in the Chrysler PT Cruiser are the fuse №19 (2004-2005) or fuses №11 and 16 (2006-2010) in the Engine Compartment Fuse Box. A Power Distribution Center (2001-2005) is located in the engine compartment; next to the air cleaner filter.

Where is the fuse panel on a Ford Explorer?

The fuse access panel is on the left side of the instrument panel next to the steering column. A label identifying the components and circuits is located on the inside of the cover. WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

Where can I find the fuse for the instrument panel?

A label identifying the components and circuits is located on the underside of the cover. The fuse access panel is on the left side of the instrument panel next to the steering column. A label identifying the components and circuits is located on the inside of the cover.

Where is the fuse access panel located on a 2004 Chevy Silverado?

The fuse access panel is on the left side of the instrument panel next to the steering column. A label identifying the components and circuits is located on the inside of the cover.