Are Yankee screwdrivers still made?

Stanley stopped production of “Yankee” brand screwdrivers nearly 15 years ago, but several other manufacturers have since stepped up to bring back the design. This article is about newer models that you can still purchase, but I’ve included a few resources for antique Yankee screwdrivers later in the article.

Why is it called a Yankee screwdriver?

The term “Yankee screwdriver” is often used to describe push/pull type screwdriver other than one manufactured by North Brothers Mfg. Co. or Stanley Tools, who purchased the rights to the well-known Yankee brand or trade name in the 1940s from North Brothers.

What is a Yankee screwdriver used for?

Just as a standard ratchet, the Yankee can tighten or remove screws, with the use of such an adapter. Some handymen use drill bits of varying sizes with the Yankee screwdriver as well.

When did Stanley buy North Bros?

1946
Mfg. Co. or more simply North Bros.), was an American manufacturer based in Philadelphia, Pennsylvania that specialized in the making of hand tools, small appliances and some specialized power tools. They were family owned and operated for over 60 years before being acquired by the Stanley Works in 1946.

When was the Yankee drill invented?

The original brand was “Yankee,” manufactured by North Brothers from 1895 to 1946. In 1946 North Brothers was purchased by Stanley. Your particular model, No. 45, is a rare find because it was produced in 1947 and is one of the first of the Yankee-style push drills to have a plastic handle.

What is an offset screwdriver?

Definition of offset screwdriver : a screwdriver with the blade at right angles to the shaft for use where a straight screwdriver cannot reach the screwhead.

How do you remove a bit from a Yankee screwdriver?

If you were lucky enough to get a bit with your Yankee, remove it now. If you don’t know how, just pull down on the chuck and lift the bit out. On the opposite end of the screwdriver is, ironically, the clutch screw. Behind this, lies the return spring.

Where would offset screwdriver be necessary?

Use an offset screwdriver in close quarters where a conventional screwdriver cannot be used.

What is a reed Prince screwdriver?

Also known as the Reed and Prince, this screwdriver is similar to a Phillips but with a cross shape. Frearson bits accommodate all Frearson screws, regardless of size. The Frearson head is tapered to a sharp point, which allows for higher applied torque than the rounded-tip Phillips.

What is offset screwdriver used for?

noun. A tool consisting of a (typically double-headed) steel rod whose ends are bent at right angles to face in opposite directions, used to turn screws where there is too little space for a conventional screwdriver.

What is Philip screwdriver?

Definition of Phillips screwdriver : a screwdriver that is designed to be used with a type of screw (called a Phillips-head screw) that has a slot in its top that looks like a cross.

What is the difference between a Phillips and a Reed and Prince screwdriver?

What are the 6 types of screwdrivers?

Flat Head (or Slotted Head) Screwdriver.