How do I set up a Plantronics CS50?

Plantronics CS50 and CS55 Wireless Headset Setup WITH Headset…

1. Step 1- Connect AC power.
2. Step 2- Pair your CS50 or CS55 headset to the charging base.
3. Step 3- Plug in the included phone cord.
4. Step 4- Plug into the headset port.
5. Step 5- How to use your headset.

Can Plantronics CS50 connect to computer?

Plantronics PerSono Suite software provides the link between your CS50-USB headset and compatible softphone applications on your computer. PerSono Suite software provides the ability to remotely detect and answer/end a call from your softphone application via the headset call control button.

How do I reset my Plantronics CS50?

To reset your CS50/CS55/CS60:

1. Press in and hold the mute control (A) and the talk button (B) until the talk indicator light (C) on the headset starts blinking rapidly.
2. Press and hold the talk button (B) again.
3. Disconnect the AC power supply from the bottom of the base.
4. Test the headset to ensure it works properly.

How do I connect my Plantronics CS55 headset to my computer?

Connect the CS55 (via the SeleCT switch) to your PC, preferably with the use of a USB sound adapter. Set the sound output volume of the CS55. This is done with a “crude” and then a fine method. The crude output is set with the sliding switch on the bottom of the unit with A being the least output and D the greatest.

How do I sync my Plantronics headset to base?

To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Plantronics Bluetooth headsets.

Does Plantronics C052 have Bluetooth?

Being that the Plantronics C052 isn’t Bluetooth and doesn’t connect with your computer, there’s a simple fix! You can purchase a USB wireless headset if you choose or you can get the accessory below which will connect your C052 (CS510 or CS520) to a computer.

How do I pair my Plantronics wireless headset with base?

Place the charging base into pairing mode. To do so, press and hold the volume up (+) and volume down (-) buttons at the same time until the lights on the base unit starts flashing red and blue. Place the headset into pairing mode. Click here for pairing instructions for Plantronics Bluetooth headsets.

How do I setup my Plantronics C052?

USING YOUR HEADSET

1. Put the headset on and press the call control button located on the side of the earpiece.
2. Take the telephone handset out of the cradle and place it on the desktop.
3. At this time, you should hear a dial tone in the headset earpiece.
4. Dial the desired phone number and have a conversation as normal.

How do I install a Plantronics USB headset?

Plug the Bluetooth USB adapter into the computer. Pinch the button on the adapter for 5-6 seconds until the light starts flashing an alternating red-blue. Once the devices pair successfully, the lights on the headset and adapter stop flashing.

How do I get my mic to work on my Plantronics headset?

If your microphone is not working, check the following:

1. Make sure that the microphone is not muted.
2. Make sure the USB connection is not loose.
3. Make sure that your Plantronics headset is selected as the default audio device.
4. Make sure the microphone is pointing towards the corner of your mouth.

How do I connect my Plantronics C052 headset to my computer?

1. Included with your C052 is a phone cord, plug this cord into the square box of the D315. 2. Plug the other end of the D315 adapter into your computer, wait for the drivers to download and you’ll now be able to use your Plantronics C052 on your computer.

How do I setup the Plantronics CS50 or CS55?

How to setup the Plantronics CS50 or Plantronics CS55. 1 1. Press both the talk button (14) and the mute control button (15) on the headset for 5 seconds. 2 2. When the talk indicator light (17) on the headset blinks, release both buttons. 3 3. Press the talk button again. 4 4. Next reset the base unit by disconnecting the AC power adapter (24a)

How do I contact Plantronics for service and support?

We may use functionally equivalent reconditioned/refurbished/remanufactured/ pre-owned or new products or parts. • To obtain service in the U.S., contact Plantronics at (800) 544-4660 ext. 5538. • THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.

How do I connect my Plantronics headset to my phone?

Plug the other end of your headset phone cord into the HEADSET port of your corded desk phone. Remove your headset from the charging base, press the on button (oval shaped silver button) and a solid green LED light will appear on the Plantronics charging base.

How do I use the CS50 or CS55 with the hl10?

When the CS50 or CS55 is used in conjunction with the Plantronics HL10 handset lifter you can enable the IntelliStand feature. The IntelliStand feature senses when the headset has been removed or placed into the CS50 base unit which automatically activates the Handset Lifter and enabling headset/handset mode to answer or end the call.