How much does a brake job cost on a Corvette?

Chevrolet Corvette brake pads replacement, which includes parts and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads necessary and the extent of the damage your earlier worn down pads have caused to the other parts of your vehicle such as the rotors.

How much does it cost to replace brakes on a Porsche?

To replace the front and rear brakes, expect to pay between $2,500 to $3,000 at a Porsche dealership or around $1,800 to $2,500 at an independent Porsche mechanic. However, if you are somewhat handy, you can replace your brakes yourself for less than $1,000.

How long do C6 brakes last?

The average lifespan of brake pads is about 40,000 miles, but your Corvette is a sports car, and how you drive it can affect how many miles you get out of the pads.

Are C5 and C6 brakes the same?

Should be the same, unless the C6 is a Z51. Or a ’07-’13 F55 car or any base C6 with the heavy duty brake option (J55). There is an internal difference, since the C5 rotors have vanes that are side specific and the C6 base rotors use a post system.

How much does it cost to replace brake pads and rotors?

How much should it be to replace the brake pads and rotors? Expect a brake job of replacing brake pads and rotors to cost $250-$400 per axle on average. If you drive a heavy-duty pickup truck and haul or tow a lot, your costs may go up quite a built.

Why are Porsche brakes so expensive?

For example, getting the Porsche Ceramic Composite Brake (PCCB) for a 911 Turbo can cost you over $21,000. The reason for this high cost is that a carbon ceramic brake disc is challenging to manufacture.

How much does it cost to replace Porsche ceramic brakes?

Forum threads going back at least five years debate whether the Porsche Carbon Ceramic Brakes (PCCB) justify their new and replacement costs. Porsche asks $8,520 to put PCCB on the 992-series 911, and $9,210 to option them on the 911 GT3. A set of replacement rotors for the front axle costs $11,500.

How much HP does a C6 Corvette have?

The engine has a power output of 505 hp (512 PS; 377 kW) at 6,300 rpm and 470 lb⋅ft (637 N⋅m) at 4,800 rpm of torque.

What year Corvette is the lightest?

The 2013 Corvette Z06 is the lightest, best-balanced Corvette model, and one of the most svelte supercars on the market.

Will C6 rotors fit on a C5?

From what I’ve read, C5 and C6 brakes are the same. Should be a direct swap. I just installed Baer Decelarotors on mine and the fitment was for either C5 or C6.

What is a C6 Corvette?

The Chevrolet Corvette (C6) is the sixth generation of the Corvette sports car that was produced by Chevrolet division of General Motors for the 2005 to 2013 model years. It is the first Corvette with exposed headlamps since the 1962 model. Production variants include the Z06, ZR1, Grand Sport, and 427 Convertible.

How long should a brake job take?

Brake repairs can take anywhere from 15 minutes to eight hours. They’re usually going to take around one to three hours on average. There are a variety of brake repair types to consider, with some taking longer than others.

How long do Porsche ceramic rotors last?

100,000 miles
Ceramic composite brake discs are tough and highly resistant to wear, making them very durable compared to your average iron rotors. While conventional cast iron discs or iron rotors may last up to 60,000 miles, carbon ceramic rotors can go without replacement over 100,000 miles or even outlive your vehicle.

How long do Porsche rotors last?

30,000 – 80,000 miles
Typically, Porsche Panamera rotors need to be replaced every 30,000 – 80,000 miles depending on the factors above.

How fast will a stock C6 Corvette go?

Official output was 505 bhp (377 kW) and has a 0-60 mph (97 km/h) time of 3.7 seconds. Top speed is 198 MPH.